DALI push dimming 200W driver 24V 12V DC for LED strip light 2016 hot items
* Input Rubber cable H03VV-F 3 G 1.0mm², the green /yellow cable connect with (FG) , Brown with AC(L),Blue with AC (N)
*Signal Rubber cable H03VV-F 2 0.75mm², Blue is ( DALI or PUSH/L), White is (DA2 or PUSH/N).
DALI non polar !Connected to the BUS of the DALI Master. Connected PUSH/L with PUSH SWITCH. Connected PUSH/N with AC (N).
*Output rubber cable H03VV-F2 1.0mm², Red is output (V+) Positive ,Black is output(V-) negative. Connected to LED Lamps.
*Please make sure you connect these correctly otherwise your product will not do function correctly and could be damaged.
*Note: Any other requests we can customized.
PUSH Operation Reference No.1
PUSH Operation Reference No.2
PUSH Operation Reference No.3
DALI Operation Reference No.4:
DALI Operation Reference No.5:
1.This driver should be installed by qualified and professional person;
2.Please make sure the transformer is installed with adequate ventilation around it to allow for heat dissipation.
3.Ensure that wiring is correct before test in order to avoid light and power supply damage;
4.If driver cannot work normally , don't maintain privately;
5.Have any question, please contact ShengChang freely.