Pulse counter serves in combination with an electrical generator for the remote count of the rotation of a shaft or others
The pulse counter serves in combination with an electrical generator for the remote count of the rotation of a shaft or of any other related [hysical processes. It consists of an electrical drive and a mechanical figures wheels system. The incoming pulses from the generator are switched by an anchor gear into a mechanical movement of the figures wheels.
EZ 7/560 Pulse difference counter
This counter has two drives for the two current circuits. One system is adding the other subtracting. The counter mechanism shows automatically the difference between the incoming pulses of the addition and the subtraction. These pulses can arrive at the same time or time shifted, in this case the count is also exact and reliable.
Technical Data EZ 6/...
working principle: Electromechanical counter, adding.
counting method: 1 pulse = 1 figure
Count time : 10 pulses/sec
Pulse voltage : 24V or 220V +/- 10%
Time of switch on 100%
Display 7 mm hight, white on black bkgnd, 7 digits, during the zero reset, no incoming pulses are allowed.
Mounting 2 clamping springs or fixing holes in the front plate
Colour Front plate black dull
Weight approx. 0.7 kg
Technical Data EZ 7/...
Working principle: Electromechanical counter, making the difference
Method of counting: 1 pulse adding = 1 figure adding
1 pulse subtracting = 1 figure subtracting
Count time: 10 pulses/sec
Pulse voltage: 24V or 220V +/- 10%
Time of switch-on 100%
Display 5 digits, approx. 5 mm high, white on black ground, during the zero reset no incoming pulses are allowed
Mounting 2 clamping springs
Colour Front plate stone grey
Weight approx. 0.18 kg
Technical specifications are subjected to alternations ............. Disclaimer.