Digital oscilloscope DS-2100CA 2 channels 100mhz sample rate 50GSa/s
Oscilloscope use a narrow, high-speed electrons from the electron beam hitting phosphor coated screen surface, can produce a small point of light. Under the action of the signal, the electron beam is like the tip of a pen can depict the curves of the instantaneous value of the signal at the screen surface. Oscilloscope can observe a variety of different signal amplitude versus time waveform graph, you can also use it to test a variety of power, such as voltage, current, frequency, phase, amplitude modulation, and so on.
2ns to 50s/div
Real time sample rate
Equivalent sample rate
DC, AC, GND
Edge, video, pulse, delay
Auto, normal, single
CH1, CH2, Ext, Ext/5, Ext(50Ω)
2 mV/div to 5V/div
Max. input voltage
Vpp, Vamp, Vrms, Vmin, Vtop,Vbase,Vbase,Vavg,Freq,Period,Rise time
Hanning, hamming, Blackman-harris, rectangylar
A/CA: mono/color,320×240 resolution
Worldwide 100-225 V/40VA Max
Probe×2, power cord, user’s manual
*Specifications are subect to change without prior notice.
(1) 1 channel oscilloscope probe into jack on the probe attenuation set to "1" position;
(2) placed in the channel selection CH1, placed DC coupling gear;
(3) the probe is inserted into the probe calibration signal source holes, then trace oscilloscope screen appears;
(4) knob to adjust the vertical and horizontal knobs to waveform display stable, and will fine-tune the vertical and horizontal trimming placed calibrated position;
(5) read waveform number of cells in the vertical direction share, multiplied by the vertical attenuation knob indicates values obtained amplitude calibration signal;
(6) reads out the waveform cycle each share of the number of cells in the horizontal direction, the indicator value is multiplied by the horizontal scanning knob, calibrated signal cycle (cycle rate of frequency);
(7) general calibration signal is 1kHz, amplitude of 0.5V, in order to calibrate the oscilloscope internal oscillator frequency scanning, if not normal, adjust the oscilloscope (internal) corresponding potentiometer until the match so far.
MCH Instrument Co. Ltd, was established in 1995, founded by Mr Huang Jing Wen, (CEO & Director of company)
We Build up our own Brand – MCH series in measuring, electronic tester instrument equipments such as Oscilloscope, spectrum Analyzer, Function & signal generator, Frequency counter, DC Power Supply unit Etc….
After 20 years of growing, MCH become strong, not only in product manufacturing, but do have own expert teams in management and products R&D,
MCH won a lot of achievements in China, and we archived ISO9001:2008. Most of our products are CE, ROHS certified
We do have OEM & ODM services
S. E. Q (Service, Economic pricing, Quality) is our concern, we know what you need, and we know what we have.
THAT WHY, Your concern is our target.
Looking forward to building up our partnerships.
S. E. Q (Service, Economic pricing, Quality) is our concern, we will serve you better, we try our best to ensure all the inquiries and requirements will reply ASAP not more than 24hours
After sales service
-All our products have 12 months warranty
-Components and spare parts will deliver for free once the causing traced within warranty period
-We have technical teams will serve you once you face any products issue, thru voice or video conference.