Each KDC-18 linear transducer will be packed in every cartonbox to protect our products so as to avoid collision or extrusion for damage.
Shipped in 2 days after payment
Features of KDC-18 series
A Super service life ( 100 million cycles)
B Linearity 0.05%(stroke>275mm)
C Repeatability <0.01mm
D Operating speed ≤10m/s
E Protection class IP65
F Self-aligning linkage using two ball-joints
G Max. angular movement up to ± 15 °
Specification Parameters Data Sheet
Technical specification of KDC
Total electrical travel(T.E)
Max input voltage
Mechanical travel(M.T) B
Vibration frequency range
KDC-18 series Performance Introductions
KDC gemel series linear position sensors are designed for measurement of large displacement in the existence of wiggle. Its anodized aluminium housingcan contribute to nice appearance and super corrosion resistance. By adopting conductive plastic trackinside, the product could run smoothly and have low-noise output signals.
With the help of Self-aligning linkage, a large angle(<15°) of misalignment will not bring any negative effect. Credited to the technology of trimming resistance , MINOR can not only provide you with required linearity, but also any resistance you need, such as 5678Ω or 8765Ω.
The joint efforts of the engineering and technical personnel of the Company, the MINOR series product being continue to improve by customers and the relevant departments of actual testing in the last eleven years, performance and quality of our products have reached international advanced level. Therefor MINOR brand has a higher visibility in the industry.
MINOR series displacement sensor consists of four parts:
1. Aluminum housing. Surface anode electrophoresis, the internal structural designed by finite element analysis, high strength, flexural torsional capacity is outstanding. MINOR series products not only has the appearance of smooth, delicate touch, but also with strong corrosion resistance, field operations can be carried out without external protection status.
2.Multi-touch brush.The company has imported special composite material (rare metal brush material) of aviation from European, the brush was made through inlaying 0.03mm precious metals(It was laudatory named as metal diamond with high abrasion resistance, corrosion resistance and excellent electrical conductivity) on 0.07mm substrate material surface by the world top technology, effectively improve the brush wear and conductive properties. Multi-finger design to make the brush to keep strength and elasticity, aslo ensure brush always being connect well with the resistor substrate in vibration condition, this multi-contact safety design concept makes the contact resistance of minoxidil products always maintain a steady state lay a solid foundation for improving product linearity.
Imported Multi-touch Brush
3. Stainless steel rod. The rod was connected flexible by using universal joints or ball coupling to compensate for part of the installation angle, reducing the accuracy requirements for installing, allowing the angle deviation of installation .
4. Shaft sealing rings. It is the main factor to determine the grade of product protection. We use two-way shaft sealing technology, raw material was good at oil proof, wear ability, seal performance, so our transducers has good effect at the dust, oil resistant and water proof performanc.