EP SPEEDIFIX 2 A/B is a water based two pack economically formulated epoxy resin tile grout for setting and pointing of ceramic tiles for industrial and household uses.
It is easy to process under normal conditions, e.g ambient temperature and atmospheric pressure. It has high impact strength with very good water vapour transmission. EP SPEEDIFIX 2 A/B is also VOC compliant product.
EP SPEEDIFIX 2 A/B consists of two components
(resin and hardener):
- EP SPEEDIFIX 2 A = Filled epoxy hardener
- EP SPEEDIFIX 2 B = Filled epoxy resin
ADHESIVE FOR TILE SETTING
The resin and hardener should be thoroughly stirred before use. Mix one can of EP SPEEDIFIX 2 A with one can of EP SPEEDIFIX 2 B thoroughly until an even colour is achieved throughout. Once it is completely mixed, pour the adhesive onto the floor and spread out with a serrated trowel and fix tiles immediately or before expire of the pot life of the material.
GROUT FOR TILE POINTING
Once material is mixed as in tile setting, immediately pour the mixed EP SPEEDIFIX 2 A/B on to the tiled floor and sweep into the joints with a rubber spatula. Ensure that all joints are completely filled. About 30 minutes later or before the expiry of the pot life; the surfaces of the tiles should be cleaned off with a water saturated sponge and clean with clean water. Make sure all traces of residue are removed before it sets.