EUROSEAL NON-SANDING PRIMER SEALER

FOB Price: Get Latest Price
Add to My Favorites

Specifications

VOC: Less than 340 g/l, 2.8 lb/gl (Combined Components

EUROSEAL
NON-SANDING PRIMER SEALER
VOC: Less than 340 g/l, 2.8 lb/gl (Combined Components)
Meets Air Quality Regulations SCAQMD Rule 1151, Group II Vehicles

EUROSEAL NON-SANDING
PRIMER SEALER is a compliant,
wet-on-wet primer sealer. This
versatile, two-component 2.8 VOC
corrosion-resistant primer sealer
is formulated to be used with a
3:1:1 ratio over sanded original
finishes, sanded primer, or properly
prepared and cleaned bare metal.
Euroseal, with excellent hide
qualities, is intended to be used as a
final step before applying topcoat.
EUROSEAL
NON-SANDING PRIMER SEALER
VOC: Less than 340 g/l, 2.8 lb/gl (Combined Components)
Meets Air Quality Regulations SCAQMD Rule 1151, Group II Vehicles
ADVANTAGES:
Easy to mix
Wet-on-wet application
Compatible with all topcoats
Requires less base coat
Product Numbers:
PART A: 700 WHITE, 701 GRAY, 702 RED OXIDE, 707 BUFF. PART B: 798 CATALYST

DIRECTIONS FOR USE
EUROSEAL PART A must be mixed with EUROSEAL
PART B CATALYST and COMPLIANT REDUCER before
the product can be used. Any mixture of EUROSEAL
PART A, EUROSEAL PART B CATALYST and
COMPLIANT REDUCER will have the hazards of ALL
components. Before opening the packages, READ ALL
WARNING LABELS. FOLLOW ALL PRECAUTIONS.

APPLICATION
Apply 1 coat of EUROSEAL not to exceed 2 mils wet.
Allow to dry 1020 minutes before applying topcoat. For
best results, topcoat EUROSEAL within 30 minutes.
FLUID TIP: 1.4mm at 10 PSI at the air cap for HVLP guns.
4550 PSI at the gun for conventional guns.

SURFACE PREPARATION
Prior to application, the surface must be dry, clean
and free from wax, grease, oil, rust, dirt or any other
foreign matter. Use 1071 Compliant Surface Cleaner
on unpainted surfaces. Sand and featheredge original
finish with 240320 wet or dry sandpaper. Use 187
Pre-Treatment Coating over bare metal for optimum
adhesion.

MIXING
MIX ONLY WHEN READY TO SPRAY! Mix ratio is 3:1:1.
Mix 3 parts EUROSEAL Part A with 1 part EUROSEAL
Part B Catalyst and 1 part Compliant Reducer. MIX ONLY
ENOUGH MATERIAL TO SPRAY 1 COAT.
VISCOSITY: Viscosity of the mixed product as supplied is
approximately 16 to18 seconds in a #2 Zahn Cup at 77°F.
POT LIFE: The usable pot life of the mixture is 23 hours
at 77°F. The pot life will shorten at higher temperatures.

THINNING
Zero VOC Compliant Reducers available:
2010 Acetone
8025 Fast Universal Exempt Reducer
8050 Medium Universal Exempt Reducer
8075 Slow Universal Exempt Reducer
4040 Compliant Cleaning Solvent
2040 NOVOC Compliant Universal Solvent

APPLICATION
Apply 1 coat of EUROSEAL not to exceed 2 mils wet.
Allow to dry 1020 minutes before applying topcoat. For
best results, topcoat EUROSEAL within 30 minutes.
FLUID TIP: 1.4mm at 10 PSI at the air cap for HVLP guns.
4550 PSI at the gun for conventional guns.

DRY TIME
Dry to topcoat:
One coat
70°F (21°C) 20 minutes
90°F (32°C) 10 minutes
For best results, topcoat EUROSEAL within 30 minutes.

EQUIPMENT CLEANING
Clean spray guns and coating application equipment
in an enclosed equipment cleaner. Use PCL Compliant
Solvent. Follow your local air quality regulations for
solvent VOC requirements

TECHNICAL DATA
VOC: Less than 340 g/l, 2.8 lb/gl
(combined components)
Color: White, Gray, Red Oxide, Buff
Finish: Semi-Gloss
Solvent: Ketones, Ester, Toluene and
Parachlorobenzotrifluoride
Flash Point: 1oF TCC
Dry-to-Touch: 2030 minutes
% Solids by Volume: 4345
% Solids by Weight: 5658
Coverage: 700730 sq. ft. per gallon
@ 1 mil DFT
Viscosity: 1618 seconds in #2 Zahn
cup @ 77°F
Recoat Time: 1020 minutes
Shelf Life: 1 year from date of
manufacture when stored at
temperatures not to exceed
90°F.

NOTE: FOR USE BY PROFESSIONAL, TRAINED PERSONNEL, USING PROPER EQUIPMENT
WITH STANDARD SAFETY PROCEDURES. NOT INTENDED FOR SALE TO THE GENERAL PUBLIC.
FOR PROFESSIONAL USE ONLY. NOT FOR RESIDENTIAL USE.
REFER TO THE PRODUCT LABEL AND MATERIAL SAFETY DATA SHEET (MSDS) FOR CAUTIONS
AND WARNINGS PERTAINING TO THIS PRODUCT.

Not exactly what you want? 1 request,multiple quotations Get Quotations Now >>

Basic Information

Product/Service (We Sell): PCL COMPLIANT COATINGS  

Send your message to this supplier

Sourcing Products & Suppliers on Alibaba.com

Search Products
Enter the product you are looking for in the Search Bar and click Search
Contact Suppliers
Click Contact Now to send an inquiry or I’m online, Chat now to chat online
Check Messages
Check quotes & messages from suppliers in your email inbox or Message Center

Other products that might interest you

Unverified Supplier - PCL
United States | Contact Details

Communicate with Supplier:

Mr. Sir or Madam
Mr. Sir or Madam:
What can I do for you?
Not exactly what you want?
1 request,multiple quotations Get Quotations Now >>
You May Like: