Fresh air ventilation supplied by the Easyvent system will allow your loft to breathe, stabilising the atmosphere and providing an exit route for moisture bearing air.
Easyvent removes the potential for condensation build-up, and protects your timbers, felt and loft insulation from moisture attack.
Easyvent is installed in three easy steps.
Easyvent requires no tools, no expensive scaffolding and no expensive specialist tiles.
Step 1: Calculate how many Easyvents are needed, working on a calculation of one Easyvent for every five square metres of ceiling area.
Step 2: Decide where you will gain maximum cross ventilation. Mark the chosen areas with chalk and separate the overlaying felt by simply inserting your fingers.
Note: Always wear protective clothing including gloves and breathing mask or respirator when carrying out this operation.
Step 3: Remove each Easyvent from its packaging and insert the compression spring into the location slot to open up the vent.
Holding Easyvent in both hands, compress the vent and insert between the overlap of the felt and simply release.
The spring will expand the vent, securing it in place allowing fresh air to flow through.
No more condensation in the loft space. Ideal for Loft Insulation contractors Roofing contractors, general tradesmen and Homeowners.