Heat Knife 1) Inner packing: Poly bag; Tissue paper; EPE Cotton or according to customer requirments 2) Outer packing: Wooden box; Carton; Plastic box or according to customer requirments 3) pallet size:1200 X 800; 800 X 600
Within 25 days after confirmation normal-Heat Knife
3)Good choice for cutting webbing
4)Fine cutting edge, no disperse.
Electric Grooving Foam Cutting Machine Package SPONGE Heat Knife
What is a hot knife?
The Hot Knife is a professional-grade hot cutting tool for foamed plastics. The Hot Knife heats
up in seconds and gives the operator temperature control. Never before has working with foamed plastics
been this easy, inexpensive and free of mess.
A hot knife is normally a hand-held tool with a handle and heated blade. Most hot knives are designed for
cutting EPS foam (Styrofoam), or a similar type of insulating foam.
Hot Knife Specification
6 seconds heated to 400°C
6 seconds heated to 500°C
6 seconds heated to 500°C
Power Cord Length
What can it do?
The foam cutter/grooving cutter is for cutting different density foam , with fine cutting edge
, no mess. Cutting with the groover- sled, it is easy to make different groove shape
on the foam.
Cut the rope . and the webbing, with fine cutting edge, no disperse. Attached
with the cutting foot, the hot knife cut the synthetic fiber colth without backup under the cloth, seal
the cutting edge as well; cut the seal line on the bag. Especially good for cutting sail cloth, awnings and
Select a hot knife blade corresponding to the cutting use .
The selected cutting blade should not be longer than 3/4” past the thickness of your foam board.
The foam cools the blade as it cuts. The exposed portion can overheat and cause your blade to warp.
The blade heat on a hot knife is generated from either a transformer or an electrical circuit board.
A quality hot knife can be manufactured using both technologies. One key to a quality hot knife is
the interchangeable blade. A good quality hot knife blade should be thin and have a sharpened edge
on the cutting side.
1.Low MOQ: It can meet your promotional business very well.
2.OEM Accepted : We can produce any your design .
3.Good Service :We treat clients as friend.
4.Good Quality :We have strict quality control system .Good reputation in the market.
5.Fast & Cheap Delivery: We have big discount from forwarder (Long Contract).
For the best results, practice on scrap pieces of foam.
When cutting foam it is best to keep the temperature and speed consistent. If smoke develops during the cut,
you are cutting too slow or the blade is too hot which could result in an oversized, uneven cut. This can be
remedied by lowering the temperature and intermittently releasing the trigger during your cut. As the cutting
resistance increases, depress the trigger again. The Hot Knife will reach the set temperature within seconds.
You can accomplish your cut with minimal smoke using this process. Cutting in this manner will also prolong the
life of the knife.
Releasing the trigger approximately one or tow inches prior to the completion of the cut will help keep the blade
clean and free from buildup
Packing And Tools
Constant use of our Hot Knife may result in polystyrene material build up on blades and the brass holders.
This excess polystyrene interferes with the proper electrical and impairs the performance of the blades. The brass
blade holders and blades can be thoroughly cleaned with a wire brush.
Confirm the price, lead time, artwork, payment term etc.
Rongter sal es send the Proforma Invoice with freedom seal.
Customer make the payment for deposit and send us Bank receipt.
Initial Production Stage-Inform the clients that we have got the payment,And will make the samples according to your request, send you photos or Samples to get your approval. After approval, we inform that we will arrange the production & inform the estimated time.
Middle Production-send photos to show the production line which you can see your products in . Confirm the estimated delivery time again.
End Production-Mass production products photos and samples will send to you for approval. You can also arrange the third party Inspection .
Clients make payment for balance and Rongter Ship the goods .Also can accept payment term-Balance against B/L Copy Or L/C payment Term. Inform the tracking number and check the status for clients.
Order can be say “finish” when you receive the goods and satisfy with them .
Feedback to Rongter about Quality , Service, Market Feedback & Suggestion. And we can do better .
Suzhou Rongter Mechanical Electrical Co Ltd is a global leading professional heat cutting tools suppliers and provides the optimal cutting solutions. We develop, produce and sell heat cutting machines and equipment. Our company has been committed to helping various industries to solve a variety of different materials, angles and thicknesses cutting program, enabling them to get rid of the traditional mechanical cutting. Our headquarter is established in Suzhou, and we also provides all kinds of ... View detail