Epoxy resin for hollow threaded rod chemical anchor
Product Description: Solvent-free, epoxy resin based, two part high performance anchoring adhesive.
For the fixing of non-expanding anchors in the following:
For structural work:
Rebar / steel reinforcement anchoring in new and refurbishment works.
Bolts and special fastening systems
Metal Work, carpentry:
Fixing of handrails, balustrades and supports
Fixing of railings
Fixing of window and door frames
For fixing of the following substrates:
Hard natural and reconstituted stone
Hollow and solid masonry
Can use in damp area
High load capacity
Non-sag, even overhead
Non contraction after harden
Part A: White
Part B: Black / Red
Mixed: Gray / Pink
Mix ratio: 3:1
Storage condition & Shelf-Life:
24 months from date of production if stored properly in original unopened, sealed and undamaged packaging in cool and dry conditions at temperatures between +5°C and +25°C. Protect from direct sunlight.
Drilling of hole with an electric drill to the diameter and depth required. Drill hole diameter must be in accordance with anchor size.
The drill hole must be cleaned with a blow pump or by compressed air, starting from the bottom of the hole. (at least 2x)
The drill hole must be thoroughly cleaned with the special steel brush (brush at least 2x). The diameter of the brush must be larger than the diameter of the drill hole. After brush, to use blow pump to clean the drill hole again. (at least 2x)
Inject the adhesive into the hole, starting from the bottom, while slowly drawing back the static mixer. In any case avoid entrapping air. For deep holes extension tubing can be used.
Insert the anchor with a rotary motion into the filled drill hole. Some adhesive must come out of the hole. **Important: the anchor must be placed within the open time.
During the resin hardening time the anchor must not be moved or loaded.
Technical Data: Density:
Part A: 1.70 kg/l (±0.5kg)
Part B: 1.30 kg/l (±0.5kg)
Part A+B mixed: 1.68 kg/l (±0.5kg)
Gel and loading times:
Application Temperature (℃)
Gel Time (min.)
Loading Time (hour)
Sag Flow: Non-sag, even overhead, but need to use stopper to fix rebars before curing.
ASTM D792-00 Method A
Gel Time (min.)
Bond Strength (psi)
Water Absorption (%)
a. 100℃ / 1hr
b. 50℃ / 1hr
Compressive Strength (psi)
Tensile Strength (psi)
Elongation at Break (%)
Destroy Haul Strength (kgf)
Safety Haul Strength (kgf)
Working Standard (mm)
Steel Strip No.
Packaging & Shipping
20 cartridges per carton, each cartridge with 1 mixer nozzle.
Pallet: 60 cartons with 20 cartridges
By sea/ air/ courier express. (FOB Kaohsiung)
Courier express includes DHL, Fedex, TNT, EMS, etc.
FastFix-it Ent. Co., Ltd. was established in 1996, and our factory and office is located in Taiwan. We are manufacturer in chemicals, and dedicated to research & develop high quality adhesives. Our products have been used in a wide variety of projects, ranging from Residential & Commercial Buildings to Transport Facilities, or industry.
OUR QUALITY POLICY
FastFix-it Ent. Co., Ltd. is committed to:
üHigh quality product which meets client’s requirements and solves problems accurately.
üCompetitive pricing in market.
üContinuous Developing in new products for future market trends and needs.
üLogistical network for customer support and prompt delivery.
We also provide OEM service to some well-know brand, and our products are included:
1. Epoxy Acrylate Resin Styrene Free (10:1) in 235/280/360/380ml 2. Pure Epoxy Resin (6:1 & 3:1 & 1:1) in 360/400ml 3. Aqua Pure Epoxy Resin (3:1) in 400ml 4. Polyester Resin Styrene Free (10:1) in 235/360/380ml 5. Granite & Marble Adhesive
Fastfix is an offer private label products for chemical anchors and epoxy putty.
We have 13 years experience for manufacture and developed Epoxy adhesives, Epoxy acrylate resin styrene free, Polyester resin styrene free.
We take out the patent on our chemical anchor in 280ml (300ml) which could mix well.
We are exporting our products to various countries in Europe, Asia and South America, Middle East.
Our formulations are designed to provide a high strength bond...