Modified Resin,Polyurethane, Car Silicone Sealant 7600
1.7600 is one component modified polyurethane structural sealant, which apply to the high/medium-strength elastic bonding and has a good elasticity after room curing. 2. Strong initial strength,strong tensile strength,strong bonding strength. 3.Strong ability of resisting temperature difference, it can be connected with base material flexibly, which is green environmental-protective and pollution-free. 4. Easy to use. It’s applicable to the structural bonding and sealing of various metals and composites, for example, coach,train,recreational vehicle ,truck. 5.And also applicable to the structural elasticity bonding for all kinds of building material, such as, floor board system.
1.For the structure of coach,tarin,car and truck, such as the structural elasticity and sealing of platfond. 2. For the bonding of aluminum or polyester inside and outside the recreational vehicle. 3.For the structural bonding and sealing of metal curtain doors & windows, such as, floor board system. 4.For the structural bonding and sealing of the general aluminum alloy doors & windows,aluminum-plastic doors & windows. 5. For structural bonding of other materials.
Color: white, translucent, black,silver grey and other colors as customers request;
1. Be sure to the applicability of products by compatibility test before use. 2. Not suitable for the structural assembly. 3. Not suitable for the materials surface with grease, plasticizer or solvent. 4. Not suitable to use in non-ventilated place,which needs moisture in air to solidify. 5. Not suitable for frosting and humid surface, soggy or humid places all the year round. 6. Not suitable to use when the temperature of the materials surface is lower than 5 ° C or higher than 40 ° C.
Packaging: 300ml/Cartridge; 24 pieces/Carton Storage: be kept in a dry, shady and cool place below 27 ° C and the quality guarantee period is over 9 months from the production date.
Attention: 1. Construct in environment with good ventilation; 2. Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash with running water for several minutes, and then consult a doctor.
Instruction: 1. Clean the base material with cloth; and c lean it with solvent; 2. Then cut the nozzle and press glue gun ,balance the glue to the both sides,ensure to fill the joint and tightly stick to the base material.
The following data are only for reference purpose, not intended for use in preparing specification.
Performance Measured Value Test Method Density /mm ≤ 1 GB/T13477 Extrusion (ml/min) ≥ 80 GB/T13477 Skinning Time /min ≤ 30 GB/T13477 Elastic Recovery /% ≥ 80 GB/T13477 Tensile Modulus /Mpa (Standard Condition) > 0.4 GB/T13477 Tensile Adhesion No damage GB/T13477 Bonding after Hot Extrusion and Cold Draw No damage GB/T13477 Bonding after UV-irradiation No damage GB/T13477 Tensile Adhesion after Immersion in Water No damage GB/T13477
Show our factory:
Sample Testings in Lab: Start the production line before a series of strict sample testings by advanced machines. Such as,Tensile Strength Test,Shore-A Hardness Test,Skin over time Test and so on.
Container Loading Show:
Show our certifications and testing reports: Of course, we can provide others certifications to you if you need,such as SGS/MSDS, our silicone sealant products have been passed by ISO 9001:2008 and CNAS etc.