1. One component thread locker sealant glue
2. Use in -50--200 degree
3. 24 hours curing
4. MSDS and ISO9001
Senior Member of Shanghai International Chamber of Commerce
3#rotor 2 rpm
Maximum thread diameter
Fully cured at RTV(h)
Maximum sealing pressure(MPa)
Strength for remove
Sealing pressure of work time
% of Initial Strength
A6567, is one component, requires no mixing, low strength anaerobic
thread sealant.It is designed for the locking and sealing of metal
tapered threads and fittings. The product cures when confined in
the absence of air between close fitting metal surfaces and
prevents loosening and leakage from shock and vibration.
1. One component, requires no mixing
2. Low intensity, high lubricating properties,cured fast.
3. No pollution to the system, good resistance to shock and vibration.
4. Removed by hand-operated tool.
5. Resistant to elevated temperature up to 200°C
1.Instant sealing of metal tapered threads up to M80(NPT)
2.Sealing and locking of tapered/straight thread and stainless steel.
3.Prevent the thread corrosion.
1.With plastic tube packing, it is easy to glue. Cleaning the component interface before the
2.Increasing 20% removal of torque, removed easily.
3.Excess adhesive solution won’t cure, can be wiped with a cloth.
4.Used as a sealant, the pressure test can be done instantly after the gluing.
5.If the pipeline need to bear high pressure, high shock or strong vibration, then do the test after 24
hours’ fully cured.
Contact: Belinda Liu: Hey, I'm very glad to have the chance to be friend with you!!