1.750ml 500ml 300ml
4.Factory directly sell
5 High quality,competitive price
PU foam, PU adhesive, PU sealant, PU insulation
750ml / 500ml / 300ml
12 or 15 cans per carton
12 months when stored at 20°C
Haohai Chemical :
Key Technical Indices:
Stable foam, CFC free
Max. Yield rate:
Elongation at Break:
8 - 20%
22 - 50kPa
35 - 100kPa at 10% compression
Surface curing time:
≤ 15 min
Yield Per 100ml:
5 - 6L
Temperature Tolerance Range:
Guide For Use:
1. It can be applied to damp surfaces.
2. OCF is moisture curing.The more moisture, the quicker the cure.
3. It must be protected from Uvin External application to prevent
discoloration and deterioration of the foam.
4. Conventional paints can be applied to the foam.
5. In can be used in temperature range of 5-40°C,if in low temperature condition,
we suggest that it should be placed in 25-30°C circumstance for 30 minutes to
ensure the better performance.
6. Uncured foam can be removed with solvent. But after cure,
foam can only be removed mechanically.
Uncured foam sticks to hands and clothing.
One component foaming fill, convenience, easiness, efficiency, and reduced labor are promised in application.
High filling degree
After polyurethane prepolymer is ejected, its volume increases rapidly, filling the hole to its extreme depth and ensuring high filling degree.
Good cohesive force
Thanks to multiple carbamate radicals contained, polyurethane foam can tightly adhere to cement mortar and PVC plate, ensuring that the wind pressure to the window frame is evenly distributed among the four walls of the opening, instead of being withstood exclusively by spanker bolts on several fixed plates.
When filling and foaming, excessive foam will flow out, without causing deformation of the window frame.
High sealing performance
Ultimately, polyurethane foam will constitute a half rigid closed cell material that blocks air flow, insulates sound waves, and resists shock.
Easiness in finishing
As the foam cures, the protruding part can be cut and trimmed by a cutter easily.
As the foam cures, brushing the surface with coatings and emulsion paints can prevent aging due to exposure to ultraviolet.
Long service life
Properly painted open-air PU foam will not be prone to aging, giving a service life up to 50 years.
Flames on PU Foam will be automatically extinguished, showing compliance with the DIN 4102-B2 requirements.
Curde foam can put up with temperature -30°C—— 100°C,with resistance against solvent, acid, and alkali.
CFC free foam does not harm the atmospheric ozone layer. Besides, the cured foam causes no hazards to human and the high sealing performance ensures reduced loss of energy.
The foam has no corrosive effect on the window frame material.
Project Case - Shanghai World Expo 2010
This information was Verified by TÜV Rheinland and is valid for the following period:
2014/09/19 --- 2015/09/18
The information below covers both the Gold Supplier and its related companies, which are defined according to china laws and regulations, and which will also be clearly displayed in the full report >>
Scope: The Production of PU PRE-Insulated Duct Panel; Phenolic PRE-Insulated Duct Panel; PU Foam; Multipurpose Spray Adhesive, Special Valve for PU Foam; Design, Development Production of Serial Ploy Blend Products for Polyurethane.
Shanghai Haohai Chemical Co.,Ltd is a privately-owned high-tech company, specializing in producing polyurethane products such as pre-insulated PIR modified polyurethane ducts and PU foam. We have three subsidiary companies: Shanghai Dongyuan Fine Chemical Co., Ltd.; Shanghai Haixi Polyurethane Co., Ltd.; and Shanghai Haohai Chemical Co., Ltd.
Our customers are located around the world and we have earned an excellent reputation due to our global thinking and commitment to customer ... View detail