Note: Dear Customer, if you are intereted in this glue dispenser, please provide me with plug and voltage for reference. Thanks a lot!!!
FT-982 Semi-automatic Glue Dispenser
Power supply: AC 220V ± 10% / 50Hz Power consumption: <8W Air Source: Maximum 0.99MPa (clean dry air without lubrication) Spit pressure adjustment range: 0.05MPa-0.99MPa Spit time adjustment range: 0.01S--30S, adjustable DIP switches into Combination, a variety of available time mode Function Mode: Manual mode / automatic mode Vacuum features: adjustable to 600 mm Hg negative pressure control Repeatability and spit Frequency: Accuracy: ± 0.05% Frequency: 600 beats / min Minimum discharge rate: 0.01mL Dimensions: 235mmx225mmx60mm Weight: 2.5kg
Features: Numeric timing table Using 0.18CV constant flow solenoid control valve Indicator switch Town adjustable air suction device up to 15 inches / mercury (Hg) Compact foot switch All kinds of spare parts can be purchased
Two operating method:
(A) automatic operation (auto) (applicable to quantitative, non-timed dispensing) The switch to automatic auto position. Adjust the pressure and volume of the plastic, choose the right needles can control the flow of liquid material correctly. Every step on a foot switch, the liquid material will be in accordance with the glue to set automatic drip from the tip holes.
(B) hand-operated (manual) (applicable to non-quantitative, non-timed dispensing) The switch to the manual position. Adjust the air pressure and select the appropriate needles. Depress the foot switch, the liquid material will drip from the needle hole, release the foot switch to stop the liquid material drops out.