The silicone Gasket Maker is a one component, acetoxy cure, 100% RTV silicone rubber sealant that is a ideal for bonding, waterproofing and insulating most materials. It can be used for making gaskets on engine parts, cars, motorcycles, appliances, power yard equipment and more
The RTV gasket maker can replaces any shape or size cork, asbestos, felt, rubber, paper or metal gasket in minutes, it has good adhesion to metal, plastics, glass, vinyl, rubber, leather, fabrics, wood, tile and ceramics. Once cured, it is unaffected by temperature extremes (-104°F to 650°F)
1. Hi-temperature, low odor, non-corrosive 2. Meets low volatility requirements for oxygen sensor equipped engines,won't foulengine sensors. 3. 100% silicone rubber, permanently flexible 4, Withstands more than 150psi pressure
Red, Grey, Clear,White,Black
Placed Vertically (mm)
Tack-free Time (minutes)
Full curing time (hours, 3mm thickness)
Density(Specific Gravity) gram/ml
Below specification was measured after 21 days in the condition of 23°C, 50% relative humidity
Low-temperature flexibility °C
High temperature resistance °C
Oxygen Index, %
Adhesive strength (Mpa)
Maximum elongation ratio %
GB/T 14683, GB/T2406, GB8624
Packing:85gram, 50gram, 32gram, 20gram packing in aluminium tube by blister packing. 12 pcs per box.
Usage: 1.Surfaces to be sealed must be clean and thoroughly dry. 2.Remove cap and pierce tube seal with probe in top of cap. 3.Attach nozzle and cut a small portion of tip at head. 4.After application, allow 5-10 minutes for silicone to skinning, then assemble parts. 5.After use, remove nozzle and replace cap to provide an airtight seal. 6.If required, smooth and shape sealant with spatula dipped in mild detergent. 7.To remove excess uncured sealant with a mineral turpentine soaked cloth.
Cautions: • Ensure good ventilation if used indoors. • Contact of unvulcanised silicone sealant with eyes and mucuous membranes must be avoided as this will cause irritation. • Remove from skin with a dry cloth or paper towel, if swallowed, do not induce vomiting. • Keep out of reach of children.
Storage: Store in cool dry place, not over 27 degree Celsius, keep away from direct sun light and source of heat.
Free primer, strong adhesive force for glass, aluminum and most building material.
Easy and convenient be extruded in the temperature 10°C-50°C.
Superior resistance in both high and low temperature, from -60°C. to 180 °C.
Our company is a professional manufacturer of silicone sealant (RTV sealant), polysulfide sealant, butyl sealant and auxiliary products for glazing, structural curtain and indoor sealing. Our company was built in 2003 and acquired ISO9001 certificate in 2005. We produced 900 metric tons of sealant in 2009, and over 40% products were exported to overseas countries. Our company has had three plants so far. The major one is located in Zhejiang Province and two plants are located in Jiangsu ... View detail