1 High & Low Flowswitches on request.
2 Available in SS 316/SS 304/PP.Accuracy=2% FSD.
The simplest & most common flow meter is a fixed Orifice in a pipeline. This Orifice creates a pressure differential (i.e. pressure drop) which is proportional to flow. But the flow rate versus differential pressure is a square root function, thus at the high end of the scale the graduations are far apart and very easy to read. At the low end of the scale, the graduations are so close together that reading becomes impossible. The net result is a meter with only a 3 OR 4 to 1 usable range.
The limited rangeability of this type of meter can be overcome by adding a bypass leg around the Orifice, which has a pressure drop equal to the drop across the Orifice and bypassed flow is directly proportional to the mainline flow. This results in a meter, which has a linear function and not a square root. Since the flow meter has a 10 to 1 range, the Orifice meter will now have a 10 to 1 linear flow range, which is as easy to read at the bottom as the top of the scale. This principle can be used virtually any pipeline size, handling almost any flow rate and metering either liquid OR gas. It is one of the most versatile meters available. Its only limitation is that the solid particles OR slurries can clog the Orifice and prevent proper operation.
DESIGN FEATURES :
Dowel Pin, side plate construction
Detachable flow scales
Externally adjustable packing glands
Connections can be rotated 360 degree at 90 degree
Laminated safety glass shielding
Scale length of 180-200 mm
Suitable for larger pipeline of 50 NB to 450 NB.
The Flowrate through the Rotameters is proportional to the pressure drop across the orifice plate.
Available in SS-316/ SS-304/P.P material.
High & Low flow Switches on request.
By Pass Rotameter / 50NB to 600NB/ 10M3/Hr to 500m3/Hr / Flowtech
We are one of the ISO 9001 CERTIFIED & D & B Enlisted and leading Quality manufacturers of LEVEL, FLOW & PROCESS CONTROL INSTRUMENTS based at Vadodara, Gujarat State, India.
FLOWTECH was established by Mr.Nilesh Shah in 1998 with an investment of INR 4.5 Million covering an area of 10,000 Sq.Ft. with the aim of manufacturing process control equipments such as Rotameters (Glass & Metal Tube), Acrylic Body Rotameters, By Pass Rotameters, Orifice Flange Assemblies, Level Instruments ... View detail