common export packing
5 days to 35 days
Gasket maker-RTV silicone
Main Component: α, ω-Dyhydroxyl Methyl Silicone
Color: transparent, black, grey, blue, red.
Feature of sealant: This product is one kind of sulfur silicone sealant with one acid component which could be applied at any climate and could take chemical reaction with the water in air rapidly. Good aging-resistant ability, high flexible, perfect performance of high or low temperature resistant. Several machine waster water resistant, good elastic.
Exquisite well-proportioned cream,no agglomeration, no gelling, no surface solidify, no bubble, hard dispersing
Vertical , mm
Extrusion , ml/min
Surface setting Time, mm
2 3 Standard extend
Bonding destroy area under under standard condition %
Elastic recover rate%
Extend bond rate under standard condition
100% no damage
Setting time mm/24h
-40~ 15 0
Scope of application: This product is used for sealing of car, gear case of motor, fore-and-art board, water pump , plane flange, cover board of other machine equipment.
Using Method: 1.Cleaning up the surface with the cotton fabric, guarantees the surface not to have the dust, the greasy dirt, the rusty stain and so on. 2.In order to obtain good outward appearance, paste the temporary protection adhesive tape , near the place to be pasted after clean the surface, pull out after paste glue. 3. Pierce the seal with the cap, cover the mouth, cut bevel the tube mouth. 4. Spread the sealant evenly on the place which need to be sealed or bonded. The operation should be continuously, guarantee the sealant continuously squeeze out at cylinder shape, move the glue mouth evenly and slowly, prevent the form of bubble or hole is move too fast. 5.The sealant form shape at approximately 10 minutes, when assembly maintains the gasket thickness, fold gathers the curing at normal temperature 24 hours.
Warning: 1. This product will release a few acetic acid in the solidification process, the working conditions should maintain ventilate. 2. Do not put within kids reach, non-toxic after solidifies completely, avoid eye contact before solidification, if touches the eye carelessly, use massive water to wash, if serious go to see a doctor. 3. When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble , affects the seal effect. 4.After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth. 5.This product should be operated at temperature 5-40,relative humidity 40-80%
Storage and packing: 1. This product is non-flammable,seal store in 10-27 centigrade cool dry place.
2. The shelf life for top grade acetic gasket maker s 12 months from date of production.
3. Packing 45g/pc,85g/pc,85pc+3g promotion in tube.
For more information please refer to our Website
We'll offer our sale agents and purchasers many kinds of services and benefits.
Magpow Adhesive Industries is a hi-tech enterprise, developing, manufacturing and selling all kinds of adhesives with head office in Hunan International Commerce in Changsha City.
Our company has capital of more than RMB10,000,000 and production capacity of over 2,000 tons per year. The adhesives produced in our corporation are popular all over the world, for example, Southeast Asia, Europe, Africa and other countries and regions. Moreover, our company has been authorized as Hunan ... View detail