Agent A: 20kg, Agent B: 1kg We can also packing General Liquid Sealant For Fiber Rope as your requirement.
3-5 working days
General Liquid Sealant For Fiber Rope is one of our most popular products.Moisture-proof, waterproof, fire resistant.
General Liquid Sealant For Fiber Rope is made of high temperature curing two-component addition type liquid silicone rubber, designed specifically for precision mold fabrication, and fiber glass sleeving coating. After curing have the dimensional stability, good release properties, tear-resistant high strength, low linear shrinkage, excellent ozone and UV aging resistance, non-toxic, tasteless, and has good biocompatibility. This product is easy to use, compound viscosity is moderate, high temperatures can be quickly cured.
Characteristics after curing:
1. Quick curing at high temperature, easy to use;
2. Addition-curing, does not release any gases;
3. Superior mechanical properties, low linear shrinkage;
4. Excellent ozone and ultraviolet resistance;
5. Excellent electrical properties, good chemical stability;
6. Moisture-proof, waterproof, resistant to ozone, weather-resistant.
clear viscous liquid
clear viscous liquid
Unit or conditions
Operation time is a quantity of cement with 100 g.
Products can be added solvent used as coating products. Recommended by the solvent are toluene, xylene, and petroleum ether. When you use Mix part A and solvent evenly, and then add the part B, continue to stir well before use.
Mixing should pay attention to the same direction, otherwise, it will stir with too much bubble; Borders and the bottom of the container sizing material should also stir well, can appear otherwise stir caused by uneven local not curing phenomenon.
Casting the product vacuum pumping, remove again bubble can improve after curing products comprehensive performance.
Low temperature will cause the curing slowly, if necessary can improve the heating temperature or prolonged curing time. Also can improve the amount of curing agent to shorten curing time.
LSR1318 with contain N, S, P element of compounds and some heavy metal ion compounds, will appear difficult contact curing or not curing phenomenon. These heavy metal ions including Sn, Pb, Hg, Bi, As, etc.
elongation at break
Remark:All the above data come from 180°C/20 mins cured and put 2 hours at room temperature(25°C)
Agent A: 20kg, Agent B: 1kg
Storage and Transport:
Cool dry place for storage, storage period for 1 year. (25°C)
This product is non-dangerous goods, according to the General chemical transportation.
Colloidal components A and B shall be sealed, and care during transport leaked.
Over shelf products should confirm that there is no exception before use.
Shanghai Jorle Fine Chem. Co., Ltd. is a manufacturer of silicone, epoxy and polyurethane, with well-equipped testing equipment and strong technical force. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in LED, power, electronics, new energy and other industries.
"The customer is highest, trustworthiness first" is the tenet of our company. Being an innovative company, our company always pays attention to economic, ecological and ... View detail