Concrete Sealer X-4 produces a high gloss finish that enhances and protects the appearance of all types of decorative concrete.
Concrete Sealer X-4 produces a high gloss finish that enhances and protects the appearance of all types of decorative, stained and stamped concrete pavers, brick, mortar, masonry, concrete structures and concrete aggregate driveways.
Concrete Sealer X-4 is a special UV resistant acrylic copolymer blend which protects the surface of the concrete making it repellent to water, freezing temperatures, sun, pollution and staining. This sealer is a VOC Compliant, low odor water based combination of a sealer plus an enhancer.
Concrete Sealer X-4 can be used on all types of concrete to make it dustproof. it is particularly effective on exposed aggregate surfaces to reduce wear and to eliminate the problem of loose pebbles.
Concrete Sealer X-4 is a DIY type sealer which is easy to apply using a brush, medium nap roller or an airless sprayer at any temperature between 40 and 80°F. The surface to be treated does not need any special treatment but it must be oil, paint, adhesive and dust free to allow proper adhesion of the sealer. This coating must be applied to well prepared concrete and we do not recommend using the densifiers prior to application. You should check your concrete before applying this sealer to make sure it absorbs drops of water within a few seconds, if it beads up then use Eco Concrete Etcher prior to applying this sealer. It will cover approximately 250 to 400 sf/gal/app depending on the concrete porosity and two coats are recommended 4 to 6 hours apart. The sealer should be applied in two thin coats and not a single thicker coat. Typically 5 gallons will seal a maximum of 1,000 sf of poured concrete using the two required applications but this coverage can be lower depending on the concrete porosity and application method. If you are applying this sealer to a smooth surface and you want to add slip resistance to the concrete sealer we recommend that you add 1 to 2 packets of Stone Grip to each 5 gallons of sealer. If Stone Grip is added to the sealer we do not recommend spraying.
Concrete Sealer X-4 provides a protective coating which enhances the effect of our 20 different easy to use Instant Concrete Dyes that stain and dry on the concrete in only 5 minutes.
Concrete Sealer X-4 has also been proven as an effective anti-graffiti barrier helping to prevent paints, aerosols and crayons from adhering to the wall and allowing easy removal if they do.
Concrete Sealer X-4 is a ready to use sealer and does not require the addition of an activator which means that it does not have a limited pot life unlike some competitive concrete sealers and it has a shelf life of at least one year.