12mm MDF or chipboard as the bottom of pallet, inner with plastic film, outside with 5 layer paper box, bounded with iron sheet or according to your requirements
within15 days after receiving 30% deposit of T/T or L/C at sight
Pine finger joint board
1.Edged glued board
3.Size :as per Customer's request.
Cheapest&Good Quality Pine Finger Jointed Boards
1.Edged glued board 2.Grade:AA,AB,BB
3.Size as per Customer's request. 4.Moisture: 8
Finger joint board
It is widely used for door, desk, furniture material and the decorative material,high quanlity and any size can be made by you.
Our products with high quality and beautiful surface,welcome to purchase!
1. Species: Pine
2. Sizes: 2440mm*1220mm*(12--80)mm or According to Customers enquiry
3. Size-cut: worktop must be cut precisely in 90 angle. 4. Moisture Rate: 8%-12%. Sanding: 240 grit (face); 180 grit(back). 5. Glue: Finnish Dynea & Japanese Koyo(according to DIN EN 204) without open gluelines. , 6. Finger Joints: Quality of joints between lamellae will totally exclude breakout, gaps, holes and excess glue on Top face. Ends well trimmed; finger joint hiding at side. 7. Production Capacity: 200m3 per month
8. PACKING: a strong shrink wrap, corners reinforced, very safe packaging (plastic bands), fiberboard covering, strong wood pallets.
a) Grade: AA - Two sides sanding with smooth surface and in high strength.The board can avoid wood bending well. - Moisture content: 8%-12% - There are no chromatism, knot, oleoresin, scar, split, moldering, wormhole, damage, blue stain, or wave in the surface. - Secret joint, finger joints show on side of panel. - Suit for boiled oil to keep wood true pattern b) Grade AB - Be finger jointed and glued closely. Finger joints on side and surface are both allowed. - Little chromatism, small healthy knot(<30mm),small black knot(<5mm),small blue stain(<50mm) are allowed. - There are no oleoresin, scar, split, moldering, wormhole, damage, blue stain, repair. - Sanding with smooth surface according to client's requirement no wave on surfaces.
our raw materials and products on display
Luli group is a specialized manufacturer for wood products more than 20 years. It is focus on the products of plywood, mdf, osb, particle board, blockboard, hardboard, door skin, engineering wood, veneer, finger jointed board, and so on.
Our factory can produce kinds of particle board/film faced plywood/Plywood/blockboard/MDF/HDF door skin,and allkinds of veneers. The quality is high and the prices are more competitive,we export them to many areas,including the USA,Europe,Middle East,Asia,Africa etc, please contact with us freely.
Please feel free to contact with us if you need any wood products.
LuLi Group Co., Ltd, who well known as a leading manufacturer for wood products and steel products, is a national large-scaled enterprise approved by the State Economic and Trade Commission. It covers an area of 1.32 million square meters and own more than 6000 workers. Since the foundation of 1987, Luli group focus on the products of plywood, mdf, particle board, blockboard, osb, engineering wood ,veneer, steel products, paper products, and so on. It has certificate of CE, ISO9001, ISO14001,...