Tag: Construction use, High modulus, High viscosity, Shelf Life: 9 months
It is a one-part polyurethane product formulated by Gorcci International. It reacts with moisture in the air to form a kind of elastomer with high strength, aging, vibration, low and corrosive resistance properties. PU Sealant was widely used to join the front, back and side glass of the cars and also can keep a steady balance between the glass and the paint on the bottom.
Normally we need to use a sealant guns to press out when it shaped in a line or in bead.
Construction PU Sealant Characteristics:
One component polyurethane elastomeric sealant.
High quality, high modulus.
Solventless, non-toxicity, environment friendly.
Moisture cured, no shrinkage after curing.
Never be moldy.
Construction PU Sealant Major uses:
Suitable for joints where high resistance to penetration and
pressure are required.
For joints where low movement capacity are required.
Joints in paving, airport and bridge runway.
Seams on water pipe(back to water).
Cartridge: 310ml 20PCS/CTN
Sausage: 300ml 400ml 600ml
Full cure (dry 7 days under 20°C) for Gorvia PU sealant should be finished before applied place permits water entering into. The adhesive surface could be painted but no recommendation for solvent based paints such as colorful enamel. if should be used, please do in site testing to prove compatibility.
No permission for wet spreading tech. No recommendation solvent, water, cleaner or soap solution.
No permission for high chloride content disinfected area like swimming pool before consulting Gorvia's technician.