1.New design of making machine and electricity into the whole. With beautiful out look, fixed structure, high auto level.
2.Printing phase and slotting phase with 360° phase with electric digital adjustment
3.The phase adjusting adopts non-stop-working, 360o electrical and numerical adjustment. Input the data as per the error. Automatically adjust
4. Paper-feeding roller: The upper axle adopts ginning paper-feeding wheel while the lower axle adopts steel ginning roller. The surface hard chromium-plating guarantees the smooth feeding of the paperboard and does not damage the corrugated cap
5.With high precision of process printing, the error chromatic printing is little and easy operation.
6.Separation by electricity and pneumatic locking up, pneumatic raising plate and auto adjusting ink.
7.Four knives adjustment, with length, width adjustment upper and lower knife stand, pressing line, cutting knife ruler, pressing paper pole which have united movement by hand, saving order changing time.
8.The hint of alarm bell and hamper to increase the safety in operation.
9.Automatic counting device is adopted which can control the production quantity properly.
10.Haveing the Auto lubrication device which can prolong the life of the gear
1. It adopts the double roller pressing, once complete the slitting, slotting and punching ,creasing and folding of the corrugated cardboard in high , medium and low grade. It is suitable for the manufacturing of colorful cartons, boxed and other package products of abnormal shape.
2. The main machine adopts electrical ,ray and pneumatic united control system , saving energy, safe and high efficiency.
1.PLC control, unite control panel on control desk, simple and clear , convenient and swift. The main motor apply the frequency converter controling the speed, start smoothly and adjust the speed according the user.
2.Equipped with the number counter , easy and clear for production. Start with the alarm bell ring, more safety.
3.The wall panel applies supper quality Cast Iron , 50mm thickness, down feeding roller is made by high quality steel with balance alignment and hard chrome plated.
4.Upper feeding roller is covered by wearable rubber , long life span. Flexible channel on the surface of the rubber roller, ensuring the precise of feeding without damage the cardboard.
5.Die cutting roller is objected to balance alignment and hard chrome plate. Supper quality steel.
6.With compensating gear device in phase adjusting, digital display and control with adjusting in 360 degree both running and stop.
7.When feeding ,die cutting roller pneumatic up and touch the rubber roller ; when stop , it automatic down and separate with the rubber roller, saving using time of the rubber roller.
8.The rubber applies Taiwan You li polyurethane rubber, smooth cutting, and easy installation , can be used for 8000,000 times. Mechanical left and right moving device(40mm) for rubber roller: each cutting in different place, prolong the using life of the rubber roller effectively.
9.Speed automatic compensating device make sure that all the boxes are the same size. The soft roller self-repairing device raising the rate of reuse.
10.All the transmission gears are helical tooth, smooth transmission , little noise, with the materials of supper quality carbon structural steel, after heating treatment and high frequency hardening , HRC45-50, high wearable and long lifespan.