GORVIA S306 Acrylic sealant is packed 300ml cartridge, 24pcs/ctn, with the carton size:30*20*24.5cm, 45600pcs/1900ctns without pallet for a 20ft container.
High Elastic (Performance)Siliconized Acrylic Sealant
3. Adhere to windows, frames
GORVIA GS-S306 siliconized acrylic sealant
Sealing around window and door frames, Sealing around baseboards, Sealing around trim, Sealing anywhere a weather tight seal is desired, Sealing corner joints, Sealing where siding meets trim.
Product Characteristics :
GORVIA S306 SILICONIZED ACRYLIC SEALANT is a mildew resistant, Paintable sealant formulated to provide long lasting, flexible, weatherproof seals between most common building materials including wood, masonry, concrete, brick, drywall, metal and glass. Its smooth, creamy consistency makes GORVIA S306 SILICONIZED ACRYLIC SEALANT easy to tool, and it cures to a tough, flexible seal. GORVIA S306 SILICONIZED ACRYLIC SEALANT can be used for both interior and exterior application.
WHITE, grey as per request
Specific gravity (g/cm3, g/ml)
Tack free time (Min)
23°C/50% relative humidity
15 to 30
fully cured 24-48HOURS DEPENDING ON RELATIVE HUMIDITY AND TEMPERATURE
Application temperature (°C)
service temperature (°C)
paint over time(min)
24-month from manufacture date when stored in a cool (between +5°C and +25°C), dry place in unopened cartridges.
All surfaces must be clean and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Highly porous substrates such as new plaster should first be primed with PVA bond diluted 1:4 with water. GORVIA S306 ACRYLIC SEALANT can be applied to slightly damp, but not wet surfaces.
GORVIA S306 ACRYLIC SEALANT is not good for such applications as below
The application surface with high humidity
Where there always dip in water the effect is according to material and apply method
The surface must be clean, dry, free to dust, dirt, rust and oil
Apply with caulking guns for the cartridge types
Cleaning with soapy water after application
Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45` with an opening slightly larger than the gap to be sealed. Apply using a standard sealant CAULKING GUN.
Packaging: GORVIA EXTERNAL FRAME ACRYLIC SEALANT is available in standard Caulking cartridges, other sizes available upon