EPOX 220 is an epoxy based, solvent free, two component installation and adhesive mortar with thixotropic behavior.
Fields of Application
To adhere TPE Flex dilatation band.
Bonding of metal profiles to concrete or steel parts.
To adhere ceramic, granite or marble plate.
To adhere concrete, stone, metal, wood and many other building products.
Features and Benefits
Solvent free. Suitable for interior and exterior areas.
Due to the excellent adhesion property, adhere different kind of surfaces such as concrete, stone, metal, wood, ceramic, granite, marble etc.
Thixotropic behavior prevents sagging on vertical wall and ceiling.
Compressive Strength (EN 196-1)
Flexural Strength (EN 196-1)
Adhesion on concrete
65 minutes (at 23°C)
+5°C ile +30°C
Preparation of Substrate
Application surface must be dry, clean and clean off materials which prevent bonding, such as dust, oil, rust and remove loose pieces. Cracks and pores must be repaired with REPAMERK 1 or EPOX 310 repair mortars.
A and B components must be stirred under low speed mixture during 2-3 minutes until homogenous mixture is obtained.
To adhere dilatation tape; EPOX 220 is applied on both sides of the dilation approximately
1,5 mm thickness and 40 mm width by trowel or spatula. After lay the dilatation tape, EPOX
220 is applied on the front face and press until curing.
To adhere metal profile; EPOX 220 is applied on both side of the surface and press until curing
To adhere ceramic, granite or marble plate; EPOX 220 is applied with using a notched trowel and plates are installed. Recent position must be set within 30 minutes.
Approximately 2 kg/meter for fixing dilatation tape
3,75 kg component A + 1,25 kg component B = 5 kg set
12 months in original, unopened package.
Store in dry area between +5°C and +35°C. Protect from heat, freezing and direct sunlight.
Clean tools and equipment with thinner immediately after use. Dried material can only be removed mechanically.