|Brand Name:||RASTEME||Model Number:||UDAC32||Place of Origin:||Japan|
1. USB Audio 2.0
2. Three digital IN: Optical,Coax, USB
3. DAC: 32bits,192KHz (PCM1795 IC)
4. Compatible:Win XP/Vista/7 & Mac
1.Built in high-end TI PCM1795 192KHz / 32bit DAC IC, also supports D/A converter with high-performance
2.The high-end TI TPA6120 IC allows best headphone outputs with 120dB dynamic range and excellent S/N
ration at ultra-low distortion of 0.00014%. The professional TI PGA2320 IC allows DC amp configuration
at maximum 100mW (32Ω) with 102dB dynamic range and ultra-low distortion of 0.0003%.
3.Special design allows all high performance parts to be enclosed in a compact case and delivers higher
level sound quality and reproduces excellent atmosphere.
4.The S/PDIF ( Toslink & COAX ) and USB inputs are all compatible with 192KHz / 24bits.
5.The analog output is using standard RCA pin jack.
6.USB audio signal is compatible to USB AUDIO 2.0 (High-Speed) digital voice input. X-MOS LSI use.
7.The USB is compatible with Windows XP / Vista / 7 or later version, and MAC OS 10.6.3 or later version,
also compatible with maximum 192KHz / 24 bit.
8.The USB side is digitally isolated to isolate the noise from PC.
9.The special Windows drivers are also compatible with ASIO, and WASAPI can also be used with Vista
and Windows 7 to enjoy better quality sound.
10.The highly accurate ±1.0ppm TCXO ( Temperature Compensated Crystal Oscillator ) allows fast sampling
and high bit rate audio data processing, as ideal data, without deterioration.
The ±1.0ppm TCXO suppresses clock jitter, which is an important factor in audio deterioration, to achieve
sound that is clear and faithful to the audio source.
11.The headphone outputs are OCL (output capacitor-less). Without capacitors, the sound is transmitted
directly to achieve crystal clear resolution.
12.The headphone terminal is using φ6.5 standard jack.
13.The built in 96×96 dot OLED display shows input sampling rate and can be used as a level meter.
14.The OLED has a broad angle of vision and does not glare like LCD and can be clearly seen from any angle.
15.The circuit for driving OLED is designed for avoiding noises from traditional fluorescent tube and LCD.
16.The OLED screen can be customized by users to display their favorite images from other sources.
17.The USB port can be used to update the firmware. The built-in 96 x 96 dot full color OLED screen can
be customized by users to display logo or images from other sources.
18.The use of SMV (Smoothing-Volume)technology allows very fine adjustment of volume, and a pleasant
volume can be maintained without any sudden sharp changes as there are from analog devices.
19.THD: 0.0012% (192KHz / 0dB)
20.OUTput Level: 2Vrms (un balance)
21.Dimension :W123 mm × D127 mm × H48mm