|Place of Origin:||Tianjin China (Mainland)||Brand Name:||Jinfan Mould||Model Number:||TS6|
|Material:||Rubber,NBR,HNBR,EPDM,Viton||Shape:||Flat Gasket||Standard or Nonstandard:||Standard|
|Type:||TS6||Gasket type:||clip type||Certification:||ISO9001:2008|
|Plate thickness:||0.5mm,0.6mm,0.7mm,0.8mm,1mm||Plate theta:||High Theta,Low theta|
|Delivery:||Sea freight, Air freight||Structure:||Gasketed plate heat exchanger|
|Packaging Detail:||carton box|
|Delivery Detail:||7 days|
1.High quality,good price
2.High heating transferring coefficient
3.TS6 EPDM plate heat exchanger gasket
1.Design,manufacturer Moulds for PHE
2.Plate heat exchanger plates, gaskets, frames
3.Hundreds of employees, many professional designers
4.More than forty sets of processing centers , NC milling and Gantry milling
5.ISO9001:2008 international quality standard certification
6.High quality and competitive price
7.TS6 EPDM plate heat exchanger gasket
The plate type heat exchanger is the most economical and efficient type of heat exchanger on the market with its low cost, flexibility, easy maintenance, and high thermal efficiency. Plate heat exchanger consists of a number of gasketed plates which are fixed between a top carrying bar and a lower guide bar. The plates are compressed by means of tie bolts between a stationary frame part (the head) and a moveable frame part (the follower) Fluids enter the plate heat exchanger through frame connections and are distributed to plates. The flow to alternate passages between the plates is controlled by alternating the placement of gaskets. These are available in single and multi-pass units, depending upon the application.
Tianjin JinFan Mould Cop., Ltd. is a professional company devoted to design and manufacture plate type heater-exchanger moulds, owning hundreds of employees and more than forty sets of processing centers , NC milling and Gantry milling. We can provide three hundreds of plate type heater-exchanger moulds for our customers. JinFan mould company has nearly 20 years experince on design and manufacture plate type heater-exchanger moulds. We also has a group of engineering technology staffs with nearly 3 decades plate type design. With few decades experince and research on world advanced plate type, we have formed an unique design idea. Under the concept, we have expoited the bigger 500 holes mould and 400 holes mould respectively in different time. We obtain customers appreciation owing to our reasonable price, solid quality and comprehensive services.
Our working center is science and technology, our principle is actual and creative. We carry out the thoughts that science and technology is the first productivity all along, and we are also strict in quality, so our company have passed the ISO9001:2008 the authentication of international quality system, we strictly manufacture according to ISO9001:2008 international quality standard moreover. And our quality goal is that products qualified rate reach to 100%.