High quality rohs dimmable led strip driver
Description for dimmable led strip driver: ♦3528 SMD as the light source ♦High brightness,single color/RGB ♦High luminous efficient and low power consumption ♦Easy installation,3m self adhesive tape in backside ♦The led strip light can be devided by every 3 leds ♦Long life of over 50,000hrs of usable life ♦With 2-3 years warranty Specifications for dimmable led strip driver: Dimension: 5000*8mm LED Chip: 3528 SMD TOP LED Emitting color: Red, Yellow, Blue, Green, warm white, cool white LED Quantity: 120 Material: FPC FPC color: Yellow, White, Black Beam Angle: >120° Working Voltage: DC12V / DC24V Rated Power: 4.8W/m Life Span: ≥50000 hrs Working Temperature: -25°C~55°C Working Humidity: 10%~95% Protection Degree: IP65
Part No. Color Descrip. Size(L*W) Watt Led Q’ty Volt Packing IP NS-3528-A R Red 3528LED 5000*8mm 4.8/m 60leds/m 12V 5m/roll IP65 NS-3528-A Y Yellow NS-3528-A B Blue NS-3528-A G Green NS-3528-A WW WW NS-3528-A W White NS-3528-A RGB RGB Features for dimmable led strip driver: 1, Using super bright SMD LED as light source. High brightness, low-light decay, long life, color and good consistency; 2, Can be bent, can be arbitrarily fixed in the concave surface; Small size, rich colors. A red, yellow, blue, green and white and other colors for customers to choose; 3, Every three or six LED lights can form a loop; Every three or six LED lights can be cut along any of the above tangent, without damaging other parts; 4, Low voltage power supply, security and stability; 5, Formed by the printed circuit board, on the back of a double-sided adhesive for paste, small size. There are many colors available for customers choice; 6, For transparent or non-transparent material around the light; 7, Each volume of the standard length; 5 meters / roll, according to customer requirements. 8, Long life, use 50000-80000 hours. 9,Better quality and lower price. 10,3years warranty. Dimension (unit − mm) for dimmable led strip driver:
Accessories for dimmable led strip driver: LED Strip Connection: Connectors are necessary if you want to connect the cut sections together or connect a section to power. (Connector of strip to strip and connector of strip to power are both available) 1. Cut along the mark line, tear a little bit 3M tape from the mark. If 3M tape is not peeled off a little,it will be not easy to insert the strip into the connector. 2. Pull the black plastic lock out from the connector, insert strip. 3. Make sure the soldering pads fully touch the conjunction metal. 4. Push the plastic lock back towards the middle in the lock position. 5. Do not use too much strength while pulling the plastic lock, otherwise it can destroy the connector. Notes for flexible LED strip mounting 1. Please make sure that the back-surface of SMD LED ribbons are clean and dry. Dirt, oil, silicon oil, etc. 2. Make sure that the adhesive backing is removed completely to guarantee perfect mounting. 3. After the SMD LED ribbon is well-positioned, press the strip with an appropriate force Installation for dimmable led strip driver:
Safety and Maintenance Information 1.SMD LED ribbon itself and all its components may not be mechanically stressed. 2.Don't damage or destroy conducting paths on the curcuit board while installation. 3.To guarantee safety,only qualified person are allowed to install led strips. 4.Make sure SMD LED ribbons are mounted to correct electrical polarity. 5.Parallel connection is highly recommended for its high safety. 6.Serial connection is not recommended because unbalanced voltage drop may damage SMD LED strips 7.Insufficient and unstable power supply may cause flexible strip damage. 8.Don't install SMD ribbons dicectly on metallic or any other conductive surfaces.
Package for dimmable led strip driver:
Applications for dimmable led strip driver: 1) Architectural decorative lighting 2) Archway, canopy & bridge edge lighting 3) Amusement park, theater & aircraft cabin mood lighting 4) Emergency hallway lighting 5) Auditorium walkway lighting 6) Stairway accent lighting 7) Concealed lighting 8) Backlighting for signage letters 9) Channel letter lighting 10) Cove lighting
1.Payment- T/T , 30% deposits before production, 70% balance to be paid before deliverying (paypal, western union, bank transfer are welcomed) 2. Sample can be delivered in 3days 3.Shipping freight are quoted under your requests 4.Shipping port,Shenzhen, Mainland China 5.Discounts are offered based on order quantities 6.No MOQ Our Service 1.Professional person communicate with you before the order 2.OEM&ODM, also provide customized service 3.Distributoership are offered for your unique design and some our current model 4.Protection of your sales area, ideas of design and all your private information 5.Provide strict quality check for each part,each process before export 6.Provide complete post-sale service,including installation,technical guide Our Team&Factory