4. Good waterproof, moisture resistance, very low water absorption
5. Good temperature resistance, resistance temperature of 150 °C in 1 hr short time
For sealing and protection of power capacitors, filters, sensors, automotive electronics and optoelectronic LED
1. Stirring A component evenly before using it .
2. Weighed in a 5:1 ratio A, B two components, stir well stay with after vacuum deaeration to use within 60 minutes run out.
3. Good potting devices ,if necessary, continue to pumping vacuum, help to increase the electrical performance of the device.
4. Curing conditions: 25 ° C for 24hrs at room temperature ; or let stand for surface bubbles after heating 65 °C × 0.5hr.
5. Note: adhesive start the reaction after adhesive preparation , accompanied by heat release. With the greater amount of glue, the greater the heat release, the shorter operating time, required in a shorter period of time you are finished using
6.The above tests are measured under 100 g with adhesive
Package & Storage
Part A : Black , 25kg/bucket Seal and Avoid light and light
Part B: Black, 5kg/potShelf life: Part A 6 months, Part B 6 months
Thanks for your visit our website , we are manufacture Polyurethane, Epoxy, Silicone adhesive sealant and grease for automibile,construction,electronic,ect.We have the own factory, Technical team and After service team. We have supplier for many Top 500 company and also OEM for many big brand.
We will provide the professional solution for you.
Out standing customer care services at any time,24 Hour Help Support on line or call +86-400-882-1323