This device is the only Paint Roller Winding Machine which really adapts servo control in our country
The equipment adopts the gear-driving structure and PLC control program, and is driven by the step motor gear rack. The parameters can be input through the touch screen for programming the control program, and relevant parameters can be input orderly by rotating the selecting positioning mechanism, to complete the action of the hot melt equipment through the coordinated control of the programmable controller. The equipment can be used with cementing, without cementing on PVC in advance and the equipment do the cementing automatically on the tray of the equipment.
Action (workpiece flow) process:
Startup – Insert PP pipe onto the main shaft manually, and then put on the auto-feeding cylinder clamp. Press the reset key to return the equipment to the initial position and then press the start-up switch. The equipment starts to operate automatically with fire, for blowing away the hairs (so as not to cause the pressure hairs). After a period of hot melting, the inductive switch will receive the signal for cutting the fire source and switching off the air source of liquid-gas and oxygen automatically, and at the same time, the hair blowing air source is cut off. After that, the melt and finished products are loosened, and the cylinder will be reset automatically. The actions will be circulated.
1. Production efficiency:100 pieces-130s piece /h. 2. External dimension:(L: 1700 under maximum travel length) 3. Qualified rate: more than 99%; 4. Power supply: 220V stable power supply (control voltage: DC24V) 5. Air source: 0.4-0.6Mpa 6. Power: 1.1kw