With paper tube inside and water proof craft paper cover in rolls
within 20 days after received the 30% deposit.
1. Good flexibility
3. Active Installation, Fixed installation, jointing installation
Guangzhou HWAP Construction Materials Co.,Ltd is a specialized supplier of floor covering, dealing in sales, installation and after-sales service of PVC plastic floor. Our company supplies the great variety of goods which are separated high, middle, and low grades ,including the PVC pure color roll flooring, the stone model floor, the embossed PVC sheet or rolling, the rubber flooring, the emery flooring, the antistatic flooring, the epoxy flooring, the wear-resisting flooring and so on. We can provide the paving and installation of self-leveling as well as sports plastic grounds if you need .
1. Made of virgin material and environment conservation products: leaf mold-resistance and technical antibacterial processing.
2. PVC one-off knife coating products
3. 100% pure PVC wear-resistant coat, so it has the longest life in congeneric products.
4. Quality warranty period is six years and service life is as long as ten years.
5. Good mobility, anti-aging, water-proof, fireproof, slide-prevention.
6. Easy installation and maintenance.
Wood /grid grain
The ways of installation: Active Installation, Fixed installation, jointing installation.
1. Active Installation: special cementation tape will be used between the floors and there is no cementation tape between the floor and the ground so that the flooors can move easily.
2. Fixed Installation: It is a partial cementation. Brush 15cm into the ground and glue them together with the edge of the floor as the criteria.
3. Jointing Installation: Slot on the surface of the floor before welding it by hand or by machine. The slot place must keep clean. The welding tempertature mustn't be lower than 500°C. The welding can be operated by automatic equipement or by manual control. use a short line to test the temperature and the spped before welding. Then we take two steps to remove the reductant welding line after cooling. Firstly we use the crescen moon shovel to remove the half the bulge of welling line. Then remove the remains after it is fully cool.