Big Packing: A(white):190L B(black):19L Small Packing: A(white):19L B(black);1.9L
Within 10 days after receiving your deposit
bitumen joint sealant
1High strength and elasticity
2Outstanding adhesion4neutral cure,high temperature silicone s
1.Two-part, neutral cure, high temperature cure, easily used, mix A-part and B-part when used in certain percentage. And has an excellent adhesive ability to most construction materials.
2. Excellent durability of high and low temperature, ozone and ultraviolet rays.
3. Excellent weather resistant.
4. Excellent adhesion and good consistency
Where to use
Two component silicone sealant is suitable for sealing and assembling insulating glass as a second seal, but can’t be used as structural sealant
1. Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry. 2. Filling out the gaps and edges for two-side binding 3. Cover outside of joint areas with masking taps before application. 4. For better appearance revise the edges before the sealant solidified. 5. Construct in environment with good ventilation 6. Keep uncured silicone sealant beyond children's reach. If getting into eyes, wash with running water for several minutes, and then consult a doctor.
Limitations 1. Unsuitable for structural adhesive; 2. Unsuitable for airproof location, because it is required to absorb moisture in air to cure for the sealant; 3. Unsuitable for the frosty or moist surface; 4. Unsuitable for the continually soggy place; 5. Can't be used if the temperature is below 40C or above 400C on the surface of the material.
Two component silicone sealantcan keep good viscous degree and can easily extrude at -25°C to 50°C
A-part white color, B-part black color, Mix A-part and B-part in rate 10:1 when used, the color is black after mixed
Storage and usable life of bitumen joint sealant
A-part and B-part separately stored at dry and airy, 27°C or lower temperature conditions in the original unopened container.
Shelf life: 12 months from the date of manufacture
Jinan Ou Ya De CNC Machinery Co., Ltd., is a professional engaged in research, development, production and sales as one of the large-scale machinery and equipment production enterprises, independent research and development of a new type of automatic light partition board production line, Magnesium Oxide panel equipment,high frequency welding hollow aluminum spacer production line, lightweight wall panels, high frequency welding can be bending of aluminum spacer, hollow glass aluminum spacer ... View detail