Tire Puncture Repair
Tyre Sealer & Inflator
Tyre Sealant, Tyre Inflator
100% applicable to breach within 6mm
No jack nor
CAPTAIN Bicycle Tyre Sealer & Inflator (Tyre Fix) is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.
D45mm x 118mm H
125ml x 24pcs/ctn
20ft Container Loading
1. If possible remove object causing puncture. 2. Deflate the tyre; Shake the can well before use; 3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm. 4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.
1. It is just for emergency use. Repair your punctured tire with Rubber Patch at your earliest possibility. 2. Keep away from heat, flame, spark and other source of ignition. 3. Store in a cool, dry place (45C); Avoid direct sunlight. 4. Do not clash, puncture, or incinerate the can. 5. Keep out of reach of children;
Shenzhen i-Like Fine Chemical Co., Ltd, a family enterprise of I-Like Holdings Group, which was started in 1997, has been a leader in the design, manufacture and marketing of aerosol products and sealants. Our aerosol products include Spray Paints, Car Care Products, tyre care and repair, and industrial-purpose products. Our sealants include but not limited to polyurethane (PU) sealants, PU foam (expanding foam), silicone sealants, RTV Gasket Makers, and contact adhesives.