|Type:||Other Waterproofing Materials||Place of Origin:||Istanbul Turkey||Brand Name:||EMULZER|
|Model Number:||Izola Export|
Izola Export (Bituminous Emulsion)
It is a ready-to-use waterproofing material obtained by mixing water and bitumen by using special methods. It adheres firmly to the surface it is applied,forming a waterproof layer.
Izola can be used as an undercoat prior to all bituminous membrane applications.Thanks to its superior adherence characteristics,it allows bituminous membranes under which it is applied to adhere firmly to the surface they are applied.leaving no gap in between.
It is used to insulate water leakage on all horizantal and vertical surfaces in closed spaces such as foundations,
underground storehouses and basements,and in damp enviroments such as bathrooms,kitchens and toilets, etc.For the aplications requiring durability aganist higher water pressure,and on cracked surfaces,it must be reinforced with materials such as fiber glass,poyester felt,reinforcing fabric,etc.
The alum material obtained by mixing Izola with sieved fine sand and cement is applied with a trowel to smooth out and level the surface ,or to provide a protective coat over insulation.
In parquet flooring applications with hot bituminous materials,it is applied over the alum as an undercoat.
It is applied onto construction molds for easy demolding,and to provide a smooth surface,It prevents concrete curing water from damaging molds.
It is very economical.
Due to its inflammable and non-toxic characteristics it can be safely used in closed spaces.
Because it is thinned with water,it adheres perfectly to all kinds of surfaces,even when the surface is moist.
By the evaporation of water it contains,it forms a waterproof and water-insoluble layer.
Izola is a cold applied material.After having mixed with water with aratio of 20%,it is applied with a bitumen brush,roller or pistol.Depending on weather conditions,it dries in approximately 4-5 hours.It should not be applied in rainy weather,or at temparatures below +5°C.Each coat must be applied only after the preceding one is completely dry.
400 g/m2 for each coat