Kafuter K-5911 RTV Silicone Sealant Spray
1.One-part, neutral, no corrosion,room cure RTV silicon sealant
2.high viscosity, good thixotropy, will not produce any toxic or irritated odor
3.high-temp, pressure and solvent tolerance, low shrinkage, and no collapse.
4.good water and oil proof, impact and vibration resistance.
1. Seal in big fitting gaps or joints in flange≤6mm
2. Seal in heating terminals, bond themagnetic motor with its shell.
3. Seal in high voltage components or terminal, sensors, transformers, etc.
4. Bond metal, glass, ceramic, semi-conductor components, and plastic, etc.
5. Also, can seal in high temperature oven, steam iron, and industrial pipeline, etc.
K-5911 Silicone Sealant
Initial Cure Time(25°C,min)
Volume Resistivity (Ω.cm)
(1) First, clean the surface,and apply the glue with less than 6mm thickness on the bonding surface, then assemble it.
(2) Wait for 5 minutes for initial cure, and 24h full cure.
(1) The cure cndition under damp air, also need more time to cure if the area is large.
(2) Pls tighten and store it well in case of curing inside.
300ml/tube, 30 tube/carton
Outer Carton Size: 32X25.5*24.5cm