Kafuter- K-8810W Low Voc Construction Adhesive Sealant
(Especially bonding the hard-plastics)
(1) Fast cure, quick set in several minutes
(2) Two-component, super strength, and impact resistance.
(3) Easy to use, and using in assembly lines.
Bond the hard-to-bond plastics, good adhesion to metals(except fo copper), magnets, ceramics, glass, etc.
A: Transparent viscous liquid
B: Transparent viscous liquid
|Cure Time(min. 25°c)|| ≤ 5|
|Tensile Strength(steel×steel.mpa)|| ≥18|
|Impact Strength(kJ/m3)|| ≥10|
1.The uncoated surfaces should be clean and dry.
2. Squeeze out equal amount of glue from A and B part, and mix them thoroughly.(Don’t mix the glue with large quantity at one time)
3.Coating the adhesive on the surfaces
4.This product can be used at any temperature between -60°c~200°c
1.Keep out of reach of children.
2.Use the glue in adequate ventilated place, it can produce acrylic irritating odor during operation.
3.Store in dry and cool place, keep away from heating and fire.