Produce the pump and spare parts according to client's drawing or sample.
Help customers select the type, size and operating speed of pumps that will perform at the lowest cost.
Offer Design, Installation, Repair and Maintenance solutions and Mine measuring up service.
Pay more attention to the quality in every process with different instruments.
Interchangeable metal design allow best material choice for any application.
Provide lifetime after sale service to solve any question during uses and large stock for standard spare parts.
One year guarantee for whole machine except of the wet end parts.
Pump fails to discharge any liquid.
Incorrect direction of pump rotation and impeller worn. Suction pipe blocked
Check direction of rotation and replace a new impeller
Power consumption on shaft is excessive
Rotating component is rubbing on a stationary part. Bearing worn. Drive belt tension too tight Flow rate too large Pump speed and ratio too high. Misalignment or unparallel of drive shaft and pump shaft.
Removal the rub Replace the bearing Adjust belt Modify the pump duty and speed. Adjust drive and pump shaft
Bearing is over hearing
Lubricants too much or less. Containing impurities in the lubricant Bearing worn.
Lubricating as requirements. Replace clean lubricant. Replace new bearing.
Bearing has short life.
Misalignment or unparallel of drive and pump motor. Shaft bent. Impeller unbalanced due to wear Foreign object entered into the bearing or insufficient lubrication Incorrect procedure followed in fitting bearings.
Adjusting drive and pump shaft. Replacing shaft. Remove rubbing and replace new impeller Clean the bearing. Replace or refit the bearings.
Pump vibrates or is noisy.
Bearings worn. Impeller unbalanced. Air entered into suction pipe or blocked. Flow rate is non uniform and pump not primed.
Replaced by new bearings. Replaced by new impeller. Discharge air and remove block. Improve on the pump feeding.