1 1x Main unit. P/N_ LM-HD808.
2 1x Remote.
3 1x IR X (IR receiver cable).
4 1x RS232 converter .
5 12V/DC Power Supply.
6 Operating Instructions.
7 Mounting ears.
1 - 2
To be negotiated
LINK-MI LM-HD808 high quality 8x8 HDMI Matrix Switch 8 input channels 8 output channels Video Output HDMI 1.3 With 3D
Key Words:8x8 HDMI Matrix Switch (Routing Type) HDMI 1.3 With 3D Model No.: LM-HD808 MY SKYPE:linkmi66
LM-HD808 is an 8x8 HDMI Matrix. It allows any of the eight Input Channels (HDMI) to be routed to any of the eight Output Channels (HDMI), no matter the source is HDCP or not. Users can choose several different ways to control the matrix: by using infrared, RS232, and LAN and supplied remote control. LM-HD808 internal EDID library features default EDID configurations, in addition to native EDID data for any output/display. LM-HD808 offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
♦ Allows up to eight HDMI audio/video devices to be independently switched to eight HDMI monitors, HDTV’s, or projectors. ♦ The eight output channels could show the same or different source simultaneously no matter the source is HDCP or not. ♦ Reading and saving EDID function from displays. ♦ Support high definition resolutions, including: 1080p@60Hz@36 b/pixels, 3D, 1080i, 720p and other standard video formats. ♦ Each port support both HDMI and DVI inputs. ♦ With extra infrared extension receiver. ♦ Four switching modes: panel buttons, local IR, RS232 and Ethernet. ♦ HDCP compliant. ♦ HDMI 1.3 supported.
♦ Connect the HDMI input source (such as HD-DVD/ PS3/STB etc.) into LM-HD808. ♦ Connect HDMI OUT of LM-HD808 to display equipment. ♦ Connect the Broadband IR receive cable into LM-HD808 IR RX ports. ♦ Power on the input source you want to show. (Keep the unused input power off, otherwise it may interfere the normal display). ♦ Plug the power cable into LM-HD808. ♦ Turn on the power, when the LED panel stops flashing circularly, the initialization of the matrix are ready. ♦ Turn on the displays you want to watch. ♦ Use the remote to control the matrix, or using Front Panel, RS232 and LAN port to control.
1 1x Main unit. P/N_ LM-HD808. 2 1x Remote. 3 1x IR X (IR receiver cable). 4 1x RS232 converter . 5 12V/DC Power Supply. 6 Operating Instructions. 7 Mounting ears. & NOTE: PART NUMBER (Abbreviation as P/N)