1.Made of superior steel 2.ISO9001 Certified 3.Good interchangeablity & high strength 4.Smooth surface with long lifetime
P.M. LOCK 4
Locking Assembly Manufacturer exporting direct from Sichuan China.
P.M. LOCK 4 consists of one inside and one outside cone ring, which are joined by a set of screws. It is suitable for high torques and is self-centering. Applications which request a very precise axial positioning are not to do, owing to small axial displacement of the hub during the assembly operation.
Available for shaft diameters from 20 to 180mm.
Locking assemblies are linkers used between shafts and pulleys, which can replace the single keys and splines.
They can transmit torque through a set of tightening screws with high strength, which can make the required clamping force between the inner rings and shafts, also between the outer rings and hubs. It's wasy assmebling and diassembling.
They have a good interchangeablity. The screws are with high strength.
Their main material is superior steel.
After machining, they will have smooth and beautiful surface, a long lifetime and high strength.