Loudspeaker HD-812AB Acrylic ab Glue for Magnet/T-yoke/Washer
(1) Fast cure, quick set in several minutes
(2) Two-component, super strength, and impact resistance.
(3) Easy to use, and using in assembly lines.
Bond the magnet, T-yoke, and washer in loudspeakers
A: Green viscous liquid
B: Red viscous liquid
| Specific Gravity(g/cm3)|
A:1.00 ± 0.02
B:1.00 ± 0.02
|Cure Time(min. 25°c)|
|Shelf Life(25 °c ) || 6 month|
1.The uncoated surfaces should be clean and dry.
2. Squeeze out equal amount of glue from A and B part, and mix them thoroughly.(Don’t mix the glue with large quantity at one time)
3.Coating the adhesive on the surfaces
4.This product can be used at any temperature between -60°c~200°c
1.Keep out of reach of children.
2.Use the glue in adequate ventilated place, it can produce acrylic irritating odor during operation.
3.Store in dry and cool place, keep away from heating and fire.