oil from waste plastic
1.Effective deduster system
3.Use more than 5 years
4..After-sales service offces
Low consumption crude oil from waste plastic machine
Oil Yield Rate
Bicycles and motorcycles tyres
Safety net, farm-oriented film
Convenient bags, weave bags
Off-cut of recycled paper mill
Parameters of Crude oil
The whole process should be within 400 centigrades and maximum
pressure is 0.04 MPa.
1. First, feed the raw material into the reactor, the raw material includes waste plastic,
waste rubber, waste tyres. You can use the manpower and the belt conveyer to feed, if u uses the belt conveyer, it reduces the manpower and time, it's high effective.
2. When it begins to burn, the raw material begins to decompose, at the same time, it
produces smoke, and the smoke gets through the waste gas pipe into the desulfurization deduster, it begins the first removing, if the fuel is coal, it burns and produce the sulfur, when the sulfur gets in, meets with the alcalescent water, they neutralize, then removes the sulfur, and the dust in the smoke gets down the water, and remove the dust if not,the smoke gets into the water-film cyclone ,because of the function of the centrifugal
force, the water becomes vapor, and the dust gets down the water. Then it gets
environment protective and energy conservation.
3. When it is about 150 centigrades, it produces the oil gas, it gets through the oil pipe
into the gas separate; it’s for the first time depositing. And the oil will be clean, if not, it gets into the depositing tank, the heavy oil gets down, the clean oil gets into the cooling pool, and cool down, let the oil become liquid, then the oil gets into the oil tank.
4. Some exhaust gas with the component such as the CH4, it can't be liquified at the
normal temperature and pressure,so it goes into the waste gas recycle system,then the furnace for burning ,not only energy saving, but also environmental protecting.
Xinxiang City Jinzhen Machinery Manufacturing Co., Ltd. is a professional manufacturer for the treatment and utilization of waste resources (waste plastic, waste tyre, waste rubber and waste oil) in the domestic markets. We are located in a highly-developed industrial zone of Xinxiang, which has convenient transportation and rich technology force.
With convenient transportation and rapid economic development, our company has become a research and development-related equipment manufacturing ... View detail