uPVC Pipes & Fittings
Brands available Prince Global | Supreme Aquagold
Prince Global uPVC White Pipes & Fittings Systems are the new age solutions to high end requirements, and it come with the credibility inherent to any prince product.
Prince Global uPVC White Pipes & Fittings Systems are the answer to the research in advance polymer chemistry to enable products to withstand aggressive weather and usage conditions. The properties of Prince Global uPVC White Pipes & Fittings Systems thus attained clearly scores over copper, galvanized, PPR or alternative plastic plumbing systems.
The Prince Global uPVC White Pipes & Fittings Systems, to say the least, is virtually Install it and Forget it phenomenon to be produced by PRINCE. These systems, as described, last longer than any other material made for such application.
Ball Valve Plain Type/Threaded Coupler Single T Double T End Cap
Reducing Bush Reducing T FTA Male Threaded Tee ( Brass) Male Threaded Adopter (Brass)
MTA Pipes Reducer Female Brass Elbow Female Brass Reducer
Eco-friendly Hotels, Residential complexes, office complexes, light Industrial Complexes.
PREPARING PRINCE GLOBAL UPVC WHITE PIPES & FITTINGS FOR INSTALLATION
Cuttings: Cut Prince Global uPVC White Pipe as squarely as possible for proper bonding.
Debarring / Beveling: Ensure that the cut pipe is free burrs and filings that might prevent proper contact. Burrs and filings should be removed from outside and inside of the pipe with a suitable file.
Chamfer: Chamfer the end of the pipe to facilitate entry into the fitting.
Solvent Cement Application: Wipe & clean the pipe end and fitting with a dry rag. Use solvent cement, applying an even coat on both, the top of pipe end and inside the fitting Socket.
Assembly: Rotate the pipe to a ½ turn after inserting into the fitting socket.
Set and Cure: Usually 10 to 20 minutes ism the set and cure time for perfect joints, depending on the humidity and
Product Ranges & Technical Specifications
Pipes : As per ASTM-D 1785 Schedule 40, 80 and 120
Fittings : As per ASTM-D 2476 Schedule 80
Material : Unplastisized PVC-UV Stabilized
Color : White
Standard : As per ASTM-D 1785 Schedule 40,80 and 120
Working Temperature: Up to 60 Deg Celsius - Continuous and up 90 Deg C. for short times.
Temperature Pressure De-Rating Factor
The operating pressure of uPVC pipes will be reduced as the operating temperature increases above 23°C (73°F). To calculate this reduction, multiply the operating
Pressure with the correction factor shown below at a operating temperature of system
Operating Temp °C(F) 23°C(73) 27°C(80) 32°C(90) 38°C(100) 43°C(110) 49°C(120) 54°C(130) 60°C(140)
PVC 100% 90% 75% 62% 50% 40% 30% 22%
Dimension and water pressure rating at 23°C of Plain Pipes as per ASTM D 1785 compound grade