The product is mildewproof (fungicide) silicone sealant suitable used for toiltet, kitchen, window, door or other decoration.
1) Max-seal 6006 Mildewproof Silicone Sealant is a Neutral cure, room temperature vulcanized sealant, has excellent adhesion to most porous surfaces with mildew proof (fungicide) ability, such as concrete, stone, brick, marble, cement and ceramics etc materials.
2) It adheres to clean glass, many plastics, aluminum and galvanized steel.
3) This product is suitable used for the toilet, kitchen, window, door, aluminium composed sheet and other building decoration as waterproof and weatherproof sealant.
3) Condition request: sealant should be in temperature of 5 - 40°C
After solidify 1) Rigidity a type sclerometer: 23 2) Elongate ratio: 100% 3) Elongate intension: 0.8Mpa 4) The data just is for consulting, but not promising
Clean process: 1) All the material should be clean out, remove dust / dirt or other feculence 2) The scour must be the solvent which was tested, if use IRA / MEK or XYLENE which didn't demonstrate, the latter's toxicity is stronger and the other two are better fitting 3) Elementary clean method: First, use the wettish and undepilatory pure-cotton cloth to clean another clean cloth to clean the feculence before the solvent volatilization, it should not dry the solvent naturally, lest should feculence newly on the material 4) For small and deep interface, it needs to clean at full tilt 5) The material that was cleaned out should do with using lacquer, otherwise it should be cleaned out again. If cleaned surface exposed or in the feculence, it should be cleaned again 6) It should be changed the white cloth, which was contaminative, and it should be raved about the impregnant from the container onto the clean cloth and it should not put the cloth into container, otherwise the clean impregnant will be contaminative, it will affect the result 7) It due to all the cleanout liquid are the tinder and have toxicity, it should have good airiness condition / strictly prohibit fireworks when using them, and adopt necessary safe system
Sealant construction process: Common request: 1) Silicone sealant should be used in 5-40 Celsius degree, this can bring the better effect 2) It can stick on temporary protect adhesive tape when it's necessary, if it use the bottom-gelatinise, it must before using the sealant 3) Using the sealant should be continual, making the sealant form the columned pile out, sealant should pile out equally, make sure it full of sealant on the place where it need, avoid making the bubble 4) It must be decorate after using sealant, the common method is using the tools to make overflow sealant in the direction of interface, and then beauty the interface, make sure the interface contact equally, and then uncover all the temporary protect adhesive tape 5) After 48 hours of using the sealant, the interface can't have the big displacement, otherwise it will effect the result