Description(water base wood paint): Maydos Water Base Clear Wood Varnish, formulated with the up-to-date water base resin, containing no hazardous materials, such as toluene, xylene, formaldehyde, CAC and free TDI, is truly health guard of your family.
Features(water base wood paint): 1. Soluble in water, environment-friendly. 2. Benzene free, no hazardous toluene, xylene, formaldehyde, CAC and free TDI. 3. Strong adhesive force; superior gloss and color retention. 4. Low viscosity, but high solid content; good fullness, hardness and durability. 5. Easy application, rapid drying and yellowing resistant.
Where to use (water base wood paint): It is suitable for decoration and protection of surfaces of all kinds of wood, bamboo and rattan.
Recommended Paint System (water base wood paint): 2 coats of Maydos transparent putty for patching imperfection I coat of Maydos water-based wood varnish primer. 2 coats of Maydos water-based wood finish Clean up: Clean all equipment with clean water immediately after use. Storage: Store in cool(temperature range 5°C-45°C), dry and well-ventilated place and keep it out of the reach of children. Preparation and Application 1. Before application, stir the paint completely and evenly, filter and then wait until bubbles disappear. 2. The painted surface with PU, NC paint etc must be sanded completely to make it matte and then clean the sanding scrap. The application should be done evenly and do not apply too thick for one time. 3. If the wood has been applied solvent-based primer, then at least two weeks should be given to let it dry completely. 4. The wood surface must be dry, clean, strong and free of contaminants. Sand it with sanding paper (320#) in the same direction as wood grain. Fill the holes and cracks in the wood with transparent putty. 5. Apply 1-2 coats of putty on the treated wood. The recoat time is 2 hours and it is better to sand each coat with sand paper (400#). If the wood is very coarse, then more coats are suggested. 6. Dilute primer with 10-20% clean water and 2-3 coats are suggested. The recoat time is 3-4 hours and sand the first coat with sand paper (600#) and (800#) for the rest. 7. Dilute finish with 10-20% clean water and 2-3 coats are suggested. The recoat time is 4-5 hours and sand it lightly with sand paper (800-1000#). Good remind: 1. For better application experiences, please complement with other Maydos products. 2. Application environmental condition (above 8°C and relative humidity below 85%). 3. The dilution water quantity varies from temperature and humidity. More water at low temperature and high humidity, and less at high temperature and low humidity. 4. Prevent the paint film from wetting and don’t put wet things on it before it is dry. Recoat time varies from the weather. 5. Under normal condition, the maintenance period of paint film is one week, but it should be longer in case of low humidity and thick paint film.
Guangdong Maydos Building Materials Co., Ltd., founded in 1995, is located in Shunde District, Foshan, Guangdong Province. It takes only one hour to drive to Guangzhou. After more than ten years' efforts, we become one of the top 10 chemical and top 5 paint enterprises in China. Maydos is mainly specialized in the manufacture of high quality emulsion paint, wood lacquer, chloroprene rubber adhesive, SBS adhesive, PU adhesive, hot-melt glue, emulsion glue and epoxy floor paint.