70W Single Output LED Power Supply HLG-60H-C series
Features: Constant current design Universal AC input / Full range (up to 305VAC) Built-in active PFC function High efficiency up to 91% Protections: Short circuit / Over voltage / Over temperature Cooling by free air convection Output current adjustable through output cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Three in one dimming function (1~10Vdc or 10V PWM signal or resistance) Suitable for dry / damp / wet locations 5 years warranty (Note.5)
Meanwell 70w led driver 350ma HLG-60H-C350
A : IP65 rated. Constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function.
CONSTANT CURRENT REGION Note.6
100 ~ 200V
RIPPLE & NOISE Note.7
CURRENT ADJ. RANGE
Can be adjusted by internal potentiometer A type only
210 ~ 350mA
SETUP, RISE TIME
1500ms, 80ms / 115VAC at full load 1000ms, 80ms / 230VAC at full load
HOLD UP TIME (Typ.)
16ms at full load 230VAC / 115VAC
VOLTAGE RANGE Note.2
90 ~ 305VAC 127VDC ~ 431VDC
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.98/115VAC, PF>0.96/230VAC, PF>0.94/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION
THD less than 20% when output loading higher than 60% at 115VAC/230VAC input and output loading higher than 75% at 277VAC input
AC CURRENT (Typ.)
0.69A / 115VAC 0.35A / 230VAC 0.29A / 277VAC
COLD START 60A(twidth=275µs measured at 50% lpeak ) at 230VAC
Less than 0.75mA / 277VAC
Hiccup mode, recovers automatically after fault condition is removed
230 ~ 250V
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
Shut down o/p voltage, re-power on to recover
-40 ~ +70°C (Refer to "Derating Curve")
10 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +80°C , 10 ~ 95% RH
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
Compliance to EN55015, EN61000-3-2 Class C ( larger than 60% load) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, heavy industry level (surge L,N-FG: 4KV), criteria A
338K hrs min. MIL-HDBK-217F (25°C )
171*61.5*36.8 mm (L*W*H)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Derating may be needed under low input voltages. Please check the static characteristics for more details.
3. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1.
Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
5. Refer to warranty statement.
6. Please refer to “DRIVING METHODS OF LED MODULE”.
7. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 2.2uf parallel capacitor.
By taking the advantage of several years of experience in electronic parts, Hangzhou Coolceen Technology Co., Ltd. has the professional team engaged in the switching power supplies, converters & inverters, DVRs and CCTV cameras, which enables us to meet the special requirements of our distinguished customers.
The product lines cover AC/DC switching power supplies, DC/DC converters, DC/AC inverters and battery chargers. There are more than 5,000 standard models widely used in aut...