Mini Gps tracker motorcycle, AT03,16M flash memory,GSM and gps antenna internal,over speed alert
Specifications Real time tracking by time, distance point on the smart phone in smart phone cut off the engine/ignition remotely via SMS/GPRS GEO-fence, over-speed alarm, power off/disconnect alarms, low battery alarm, alarm can be customized; Fuel sensor detecting microphone for listen-in/voice monitoring
Features: Voice, SMS, GPRS TCP / UDP communications Track on demand by calling or SMS command Remote configuration Real-time tracking (Time, Distance Interval or Intelligent Mode) Show location directly on mobile phone with HTTP google map link Intelligent power management Tremble sensor for vehicle motion and impact detection Power low / lost alarm Listen-in/audio monitoring Geo-fencing reports: out/in alarm GSM / GPRS simultaneously Mileage report GPS antenna disconnect detection Up to 8,000 data saved capacity Anti GSM jamming Firmware change acceptable Hardware redesign acceptable Customize your logo on the device Description for GPS trackers 1. Quectel GSM module 2. Sirf-starIII GPS Chipset 3. Track by cell phone / PC 4. Over-speed alarm 5. Low power alarm 6. Shut Down alarm 7. Geo-fence alarm 8. Harsh acceleration alarm 9. Harsh brake alarm 10. GPS antenna cut alarm 11. Tremble alarm 12. SOS alarm 13. Exterior power off alarm 14. Detect car doors close/open 15. Detect the status of engine on/off 16. Cut off the engine power 17. GPRS(TCP/UDP), SMS Support, 18.Sleep mode for Saving Power and GPRS traffic 19. 900 mAh Backup battery 20. 10 I/O ports 21. Course change alarm Fuel Level Monitoring: accuracy: 10mm or 1%
Hardware specification Dimension 82*55*27mm N.W 100g Exterior Power Supply 9 - 36V Inner Lithium Battery DC 3.7V / 900mAh GSM Chipset Quad-band: 850/900/1800/1900Mhz GPS Chipset SIRFIII (super sensitivity and high accuracy) LED indicator 3 Leds (GSM LED,GPS LED, Tremble/Power LED ) IO port 1 SOS, 2 digital output, 3 digital input, 1 analog input IO specification 1 Mini USB port For upgrade the firmware and configurate the device via PC 1 SIM socket For SIM card purpose 1 SOS button Send out the emergency SMS/GPRS to preset mobile/server once button was pressed 2 Digital Output Cut off the oil/current circuit via this IO port (Should be connected with a relay). 3 Digital input Detect the ignition/door on/off 1 Analog input Monitor the fuel consumption (Better to connect with a external fuel sensor); Microphone Listen from the driver via calling.