1.steel channel bundles and load in container
2,As you requirement.
Shipped in 30 days after payment
The light steel residential building systems rely on the serried studs to bear together,which is greatly different from the beam and column system.
Each Metal Framing system has inported advanced design and fabrication system from Australia.Together with our long-term experience,we can supply our customers with integrated services including preplan,design,fabrication,installation,after service etc.
Material: cold formed steel profiles in a thickness of 2mm~4mm
Surface Treatment and Paint Material & Standards
2.epoxy ground coat in a thickness 30-40μm thick
3.final vinyl acrylic coat in a thickness of 60-70μm
External wainscot:flat galvanized steel sheet metal in a thickness of 0.5mm.
Insulation filling: XPS insulation board in a thickness of 90mm among steel transverse supports
Steam blockade: PE foil in a thickness of 80μm
Waterproof plywood panel in a thickness of 18 mm
1.5mm vinyl sheet.
Permitted loading: 3.50 KN/m2
Coefficient of thermal conductivity: K=0,045 W/2k
Side panel’s width: 1145mm; total panel thickness: 60mm. five panels fit into the long sideand two panels fit into the short side of container and they are fully interchangeable
External wainscot: galvanized and painted steel sheet metal in a thickness of 0.5mm
Insulation filling: XPS in a thickness of 50mm in the steel framework
Inner wainscot: 9mm MDF panel with wood pattern film
Joining of panels with PVC concavo-convex profiles
Permitted loading: 1.00 KN/m2
Coefficient of thermal conductivity: K=0,045 W/m2 k
Standard: according to VDE 100 regulations
Voltage: 220/380 V, 50 Hz
Network connections: CEE-connection plus/socket, 3-pole 32 A, 220V~, mounted on thetop frame in upper corners of shorter side wall
Inner distribution system: NyM-J cables of suitable dimensions, flush-mounted Protection:protective current switch (40/4E-0,03A), automatic fuses (B-characteristics) of suitable power (10A, 16A)
Earthling: connect with the corning casting
electric distribution box – 1x40/4E-0,03A (protective current switch), 1x10A &2x16A
(automatic fuses) - 1x40/4E-0,03A,1x10A 2x16A
single fluorescent lights 1x28W(energy-saving light) – 2 each
flush-mounted sockets 220 V– 1 each
Flush-mounted switches 220 V – 1 each Remark: Number and arrangementaccording to the enclosed drawings of standard container types.