|CAS No.:||66470-69-7||Other Names:||cyanoacrylate||MF:||C10H13NO4|
|EINECS No.:||229-746-76701-15-1||Place of Origin:||Jiangxi China (Mainland)||Classification:||Double Components Adhesives|
|Main Raw Material:||Acrylic||Usage:||
Construction,Footwear & Leather,Packing,Transportation,Woodworking
|Model Number:||AB GLUE,AB-glue|
|Packaging Detail:||frisr in blister plastic .and then in box .last in carton.|
|Delivery Detail:||within 10 days after 100% payment|
1. Factory Direct
3. OEM Service
The product is the adhesive with one component which could be solidified instantly, having the features of easy operating, high adhesive performance, water resistant and oil resistant etc.
|Model||Modifying Acrylic Glue|
A 10g and B 10g by aluminium tube, 20g into blister card, then 600 cards into master carton.
A 40g and B 40g by aluminium tube, 80g into blister card, 48 blister cards into small box, then 192 cards into master carton.
|Setting time||3-25 sec|
|Shelf life||24 months|
|Appearance||transparency AB glue|
|Application||They are able to stick materials of the same kind and different kinds, including metal, plastic, wood and beton. It is widely used for making and repairing of vehicles, mechanism channels and containers in chemical industry, carpentry and furniture, lanterns and signboards, toys and every-day articles. (It is comparatively good at gluing "snowflake" iron, red copper and polyolefin)|
Clean and dry the surface after getting rid of the oil, dirty, rust.
Take out the cap, pierce the seal, squeeze out evenly, mix A with B in the proportion if 1:1; brush the glue on top of the objects that have been cleaned within 3 minutes after mixing, press them with your hand and they will be fixed in 5 to 10 minutes. The service strength can be reached in 30 minutes, this glue can be used at any temperature between -60°C and 100°C.
(Don't mis the glue in large quantity at one time.
It must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess to much.
Tighten the caps after usage .Do not mix the cap of part A and B.
Wash off the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying.
Avoid eyes and skin contact, if skin contact, wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If the eyes contact, wash them immediately with plenty of water, and go to a doctor if serious.
Keep out of reach of children, guard against to enter into mouth.
Storage and Packing
Store the glue at cool, dry and well-ventilated places, keep it away from heat and fire(it is inflammable)
It is available to reuse based on passing of the test if being beyond the shelf life.