Product Series: TYT Organic Silicone Model : Neutral Anti-fungus Silicone Sealant TYT-9700 Features: 1.9700 is the silicone sealant of one component,neutral room curing,medium modulus and easy to use, which there are good extrusion property and thixotropy within -4°C~40°C. 2. Excellent mildew resistance and the mildew proof grade is 0. (GB1741) 3. Good weather ability and resistance to aging, waterproof property. 4.It can be have a strong sealing property with most of building materials without base coating after curing because of good bonding. 5. Have a good compatibility with other neutral silicone sealants. 6.It can be used in the bonding and sealing of copper,lead and galvanized metal surface,coated glass,mirror before doing a compatibility test. Application:
1.Suitable to the installation and waterproof,mildew proof sealing of various kitchenware, sanitary ware. 2. Suitable to the installation of various doors and windows. 3. Suitable to the joints and sealing of glass, marble, aluminum plate etc. white, translucent and other colors as customers request; Color: Restriction: 1. Be sure to the applicability of products by compatibility test before use. 2. Not suitable for the structural assembly. 3. Not suitable for the materials surface with grease, plasticizer or solvent. 4. Not suitable to use in non-ventilated place,which needs moisture in air to solidify. 5. Not suitable for frosting and humid surface, soggy or humid places all the year round. 6. Not suitable to use when the temperature of the materials surface is lower than 5 ° C or higher than 40 ° C. Packaging: 300ml/Cartridge; 24 pieces/Carton; Storage: be kept in a dry, shady and cool place below 27 °C and the quality guarantee period is over 9 months from the production date. Attention: 1. Construct in environment with good ventilation; 2. Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash with running water for several minutes, and then consult a doctor. Instruction: 1. Clean the base material with cloth; and c lean it with solvent; 2. Then cut the nozzle and press glue gun ,balance the glue to the both sides,ensure to fill the joint and tightly stick to the base material. Technology Data:
The following data are only for reference purpose, not intended for use in preparing specification.
Performance Measured Value Test Method Density /mm ≤ 1 GB/T13477 Extrusion (ml/min) ≥ 80 GB/T13477 Loss of Heating /% ≤ 10 GB/T13477 Skinning Time /min ≤ 30 GB/T13477 Elastic Recovery /% ≥ 85 GB/T13477 Tensile Modulus /Mpa (Standard Condition) > 0.4 GB/T13477 Anti-mildew Grade 0 GB1741 Tensile Adhesion No damage GB/T13477 Bonding after Hot Extrusion and Cold Draw No damage GB/T13477 Bonding after UV-irradiation No damage GB/T13477 Tensile Adhesion after Immersion in Water No damage GB/T13477