Polyamide MB is an excellent carrier for printing, and we are proud that our print and art is the highest quality that you can find on the market. Printing in flexo technique up to 10 colors, with printing inks that are resistible to sterilization and abrasion. Make your product stand out, take your business to that next level. Processing Instructions 1. SOAKING: Polyamide MB casing shirred or cut pieces should be soaked in COLD WATER for approximately 30 minutes. 2. STUFFING: Polyamide MB casing should be stuffed tightly; 5% to 8% larger than nominal diameter. Never under stuff casing. Clip tightly. Clip should not slip. 3. COOKING: Steam or water cook to desired internal temperature. 4. COOLING: Cool slowly. If possible, utilize an intermittent 2 minute on and 3 minute off showering cycle until internal temperature reaches 115-118 degrees. Otherwise shower continuously for 20 minutes. 5. STORAGE: We recommend you do not place product in direct airflow from fans immediately after cooking. Cooling too quickly or refrigeration casing before it is cooled down may cause wrinkles. Finished products may be frozen.