Office Lighting 18W LED Tube Light T8 Driver Inside
Specification of 18W LED Tube:
Features of 18W T8 LED tube: 1.substantial energy-saving more than 50% compared with fluorescent lamp 2.Adopts high bright Epistar light source 3.U-Type Aluminum cooling housing ,let beam angle reach 180degree,and better heat dissipation to prolong life of tube 4.High luminous flux output, > 90 lumens per watt. 5.Self R&D Isolated constant current LED driver 6.LED drivers have approved EMC certificate, including EN5502 CE-Class B-QP and FCC-Part15 CE-Class B-QP 7.The driver has anti-surge voltage and anti-surge current protection. The instantly cut off value is 600V and 15A respectively. 8.High power factor more than 0.95 to minimize the harmonic distortion 9.Very even light distribution and high uniformity,no glare to eyes. 10.Good color rendering,vivid colors under our LED lamp. 11.300mm,600mm,900mm,1200mm,1500mm optional 12.Emitted color of white,red,blue,green color optional 13.Clear,milky PC cover optional
Application: 1. Bus, shuttle, railcar passenger interiors; 2. Uninterrupted emergency lighting; 3. Focused reading and Task lighting; 4. Interior design uses; 5. Closet illumination; 6. Cove lighting; 7. Marine recreation applications; 8. Concealed accent lighting; 9. Edge lighting; 10. Counter lighting; 11. Cubicle, workbench lighting; 12. Recreational vehicle interiors.
How to install LED tube? 1. cut off the power supply before installation; 2. No starter, NO ballast, or electronic switch is required; 3. Install lamp stand and T8 lamp holder first with the same length; 4. Lamp working voltage is AC100-277V. 5. Connect the two wire terminals located at the side of the lamp to the electricity L and N respectively; 6. Do not supply the power to both pins on the same end simultaneously
Lumination Angle: Aging test:
Packing of 18W 48inch LED tube: Certificates of JDY T8 LED Tube: Application of T8 LED tube:
About our factory:
Welcome to contact us for more information!