Our Company produce the best quality production of oil palm fibre and it was proven that the fibre produced amounted to extinguished quality.
We mainly produce raw material for exporting to other country. The fibre produced was recognized by the (Malaysian Palm Oil Board). The oil palm extracted by using the latest development of technology which able to provide the consumer with the highest grade of oil palm fibre.
We provide the best services to our customers by taking account their need and demand. We had already established business links with many countries especially China. The fibres we produced have always received positive feedbacks especially concerning the production quality.
The oil palm fibre is produced from empty fruit bunch that are considered as waste after the extraction oil palm fruits.
To become the useable fiber, the empty fruit bunches go through our patented process which involve empty fruit bunches to be shredded , separated , refined and dried.
No chemicals were involved in the production of oil palm fibres. So, consumers can expect the high quality oil palm fibre to be clean and toxic free.
Inherent characteristics such as high moisture content will have a detrimental effect on the oil palm residues. Degradation and infection will easily take place thus leading to deterioration in the properties of the fibres. To prevent this from happening, a moisture content of around 15% (on wet basis) was set by our company quality control department.This value is comparable to the moisture content for all wood-based fibres
The standard has also identified impurities as a critical element in producing high quality fibres. Impurities by definition means the calyxes, spikes, aggregates or fibre strands, any dust or fine particles and parenchyma of EFB (empty fruit brunch). Since it is practically impossible to have fibre free from impurities, the maximum level of impurities allowed in the standard is not more than 5%. Our goal is to produce the finest quality of our fibers for various use in the industry.
The final EFB (empty furit brunch) fibre characteristics that merits attention is the oil content of the fibre. The presence of a significant percentage of residual oil possess a major problem in that it will react with the moisture content hence giving rise to rancidity and ultimately fungal growth. The control limit for oil content should be around 3%.
"For the purpose of commercialisation, the standard recommends ONE grade of empty fruit bunch fibre (EFB). In quantifying the percentage proportion of fibre length, the standard has established the following numerical values:
Fibre Length >10cm = % fibre proportion around 30%"
Details of oil palm fibre of our company:
Length of Fibre : 5cm - 25cm
Impurity level: 3%
Moisture content in fibre : 13% - 15%
Oil content : 2.5-3%
Fibre content in Empty bunch : 23% - 25%
Fibre bundle dimensions:
The steel wiring used in one fibre bundle is around 0.9kg
We also used plastic wirings which weigh around 0.5kg per fibre bundle.
Each bundle of fibre weigh (including steel and plastic wire) around 180kg
Compare with the standards set by SIRIM BERHAD, it was clear that the oil palm fibre produced by our company had been compliant with all the standards. This further indicate that the fibre produced was guranteed extinguish quality for further production uses.
Our method of shipping is using standard size HC container. This apply for both domestic and international customers.
For a standard HC container, the amount of fibre bundle (180kg each) that can be stored inside the container are 132 bundles. So the total weight for one contenna is around 19 tons.